Advertisement
LEFT/RIGHT-OPENED DOOR
This product is assembled according to the right-opened door
configuration. The right hinge together with its mount is fixed on
the right side of the door body. Take out the door handle from
the accessory parts and fix it on the left side of the door body.
The two holes on the right side of the door body shall be stuffed
with the handle hole stoppers, as an item of accessory parts.
In case the left-opened door configuration is required, this can
be achieved by using accessory parts.
1) Remove the right hinge, hinge mount and the lower hinge from
the door body.
2) Put stoppers in the holes that occur.
3) Install the left hinge and hinge mount (two items of accessory
parts) onto the corresponding location at the left upper corner of
the refrigerator body with Screws removed from the right hinge.
4) Dismantle the shaft from the lower hinge, put it into the hole on
the left side and fasten it securely.
5) Install the door body with the refitted lower hinge and put the
lower hinge adjusting pad in place.
6) Install the door handle on the right side of the door body with
screws through two holes and fasten them securely.
7) Stuff the two holes on the left side of the door body with handle
hole stoppers.
6
Advertisement
