How To Operate The On-Screen Menu - Sanyo PLC XU115 - XGA LCD Projector Owner's Manual

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
1
Press the MENU button on the top control or the
remote control to display the On-Screen Menu.

Use the Point
the Point buttons to select an item in the selected
▲▼
menu.

Press the SELECT button to show the item data. Use
the Point buttons to adjust the values.
◄►
To close the On-Screen Menu, press the MENU button
again.
 Note:
• The selected item is not active until the SELECT button
is pressed.

buttons to select a Menu icon. Use
◄►
Top Control
MENU button
POINT buttons
SELECT button
Remote Control
MENU button
On-Screen Menu
Menu bar
Pointer (red frame)
Press the Point buttons
▲▼
to move the pointer.
Item
SELECT
button
Press the SELECT button here
to display previous items.
Item data
Press the Point
buttons to adjust the
value.
Press the SELECT button here
to display next items.
Quit
Exit this menu.
POINT buttons
SELECT button
Menu icon
Pointer
(red frame)
◄►