Controls - Sanyo PLC XU115 - XGA LCD Projector Network Setup Manual

Chapter 7 Controlling the projector
Input
This function is to select the input mode and source mode of the projector. Click Set button after
selecting the input and source mode.
✐ The control page displays valid control items depending on the selected input mode, signal or functions of the
projector you use, therefore, there may be different controls between the described items and actual control items
on the page display. For further information , refer to the projector's owner's manual.
✐ When the projector is standby, only the timer on the setting menu is available; others are not available.
66

Controls

Click Control on the main menu. The setting method differs depending on the
contents of the page. Click on the page number to change pages and select desired
setting items.
✐ Please see the owner's manual of the projector to have the further informa-
tion of each control item.
Item
Input ........................... Selects input mode of the projector.
Source ........................ Selects signal source of the input.
Description
Computer1 : RGB(PC analog)
RGB(PC digital)
RGB(AV HDCP)
Computer2 : RGB
Component
RGB(Scart)
Video : Auto
Video
S-video
Network: Wired
Wireless