Logon - Hitachi CP-SX635 - SXGA+ LCD Projector User Manual

3.1 Configuring and controlling the projector via a web browser (continued)

3.1.1 Logon

Refer to the following for configuring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter "http://192.168.1.10/" into the address
bar of the web browser and press "Enter"
key or click " " button. The screen in Fig.
3.1.1a will be displayed.
2) Enter your ID and password and click
[Logon].
Below are the factory default settings for Administrator ID, User ID and passwords.
Item
Administrator
User
If the logon is successful, either the Fig. 3.1.1 b or Fig. 3.1.1 c screen will be
displayed.
Main menu
Fig. 3.1.1 b "Logon with Administrator ID"
3) Click the desired operation or configuration item on the main menu located on
the left-hand side of the screen.
3. Management with Web browser software
ID
Administrator
User
Fig. 3.1.1 a "Logon Menu"
Password
<blank>
<blank>
Main menu
Fig. 3.1.1 c "Logon with User ID"
13