Thermador WDC36J Specifications page 16

INSTALLATION OPTIONS
WALL-MOUNTED INSTALLATION
Thermador Warming Drawers may be installed
below any Thermador Single or Double Built-in
Oven. A minimum space of 1" is recommended
between the bottom of the oven and the top of
the warming drawer. Refer to the built-in oven
section for additional details.
UNDER-COUNTER INSTALLATION
Thermador Warming Drawers may also be installed
below any Thermador Electric or Non-professional
Gas Cooktop as long as there is no contact
between the bottom of the cooktop and the top
of the warming drawer. When installing below a
Thermador Induction Cooktop, a minimum 1" air
gap must be maintained between the bottom of
the cooktop and the top of the warming drawer.
When installing below a Thermador Professional
Rangetop, a minimum 2 3 / " air gap must be
4
maintained between the bottom of the cooktop
and the top of the warming drawer. Refer to the
appropriate cooktop or rangetop section for
additional details.
CUSTOM FRONT PANEL
This Thermador Warming Drawer requires a custom
front panel. You may build a custom drawer front
panel to coordinate with your cabinetry. Custom
panels must meet the following requirements:
– Have a handle
– Have the dimensions shown below
– Have a minimum thickness of 3
– Have all edges finished
– Be capable of withstanding a temperature of
158°F (70° C)
The cabinet base must be flat and capable of
supporting a weight of at least 110 lbs. (50 kg).
CUSTOM FRONT PANEL
Custom Drawer Front Dimensions
Build custom drawer front to the dimensions specified below. All four edges must be finished.
If using wood, the back must be sealed to prevent moisture damage.
1.800.735.4328 | THERMADOR.COM
36-INCH CONVECTION, CUSTOM PANEL
/ " (19 mm)
4
36-INCH CONVECTION WARMING DRAWER
AND CUTOUT DIMENSIONS
WARMING DRAWER
WDC36J
205