Hitachi P50X901 - 50" Plasma TV Operating Manual page 10

Plasma television
Hide thumbs Also See for P50X901 - 50" Plasma TV:
Table of Contents

Advertisement

Available languages

Available languages

Hook-up Cables and Connectors
Most video/audio connections between components can be made with shielded video and audio cables that have
phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be
purchased from most stores that sell audio/video products. Below are illustrations and names of common
connectors. Before purchasing any cables, be sure of the output and input connector types required by the
various components and the length of each cable.
300-Ohm Twin Lead
Cable
This outdoor antenna cable must be connected to an
antenna adapter (300-Ohm to 75-Ohm).
Phono or RCA
Cable
Used on all standard video and audio cables which
connect to inputs and outputs located on the
television's rear jack panel and front control panel.
"F" Type 75-Ohm Coaxial Antenna
For connecting RF signals (antenna or cable TV) to the
antenna jack on the television.
S-Video (Super Video) Cable
This connector is used on camcorders, VCRs and laser-
disc players with an S-Video feature in place of the
standard video cable to produce a high quality picture.
Optical Cable
This cable is used to connect to an audio amplifier with
an Optical Audio In jack. Use this cable for the best
sound quality.
HDMI Cable
This cable is used to connect your external devices
such as Set-Top-Boxes or DVD players equipped with
an HDMI output connection to the TV's HDMI input.
Stereo Cable (3.8mm plug to 3.5mm plug)
Used on all standard video and audio cable which
connect to inputs and outputs located on the rear jack
panel and front control panel.
Power Swivel Cable (Provided) (P50X901 only)
This cable is used to connect the swivel stand to the
rear panel of the Plasma Television.
IR Blaster Cable (Provided)
Connect the IR Blaster to the IR output of your Plasma
Television when AV Net, IR Passthru or G-LINK
are used. You must place the IR Blaster in front
of the corresponding IR window of your cable box
VCR, Set-Top-Box, or other supported equipment.
10
AUDIO OUT
3.8mm
STEREO
MINI-PLUG
TM
feature
2
RCA TYPE
PLUGS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P60x901

Table of Contents