Dynex DX-TADPCON Quick Setup Manual

DX-TADPCON
All-in-one Adapter and Converter Combo Unit
QUICK SETUP GUIDE
Important safety instructions
Read and review these instructions before using the adapter/converter.
1
Before using the adapter or converter, check the product you intend
to connect the adapter or converter to use for the manufacturer's
voltage and wattage rating, which should be located on the product.
CAUTION: Adapters alone do not convert voltage. To avoid
damaging your appliance, do not use without a voltage converter.
2 Do not leave the converter in the power outlet when not in use. Do
not continue to use the adapter/converter combo if it is not working
properly, has been damaged, or dropped in water.
3
Some appliances may operate a little more slowly when used in
foreign countries operating on 50 cycles (U.S. operates on 60 cycles).
4
At times there may be a very low humming sound in the converter,
appliance, or both. This is normal.
5
Due to unstable voltage in most foreign countries, if your appliance
has a built-in thermostat, it may shut o your appliance prematurely.
This does not mean your appliance or converter (or both) are not
working correctly. After your appliance cools down it should resume
operating correctly.
SAVE THESE INSTRUCTIONS
Warning!
This product is intended for adult use. This product is NOT
intended for use by unsupervised children. Choose proper settings and
plug in this product before directly supervising children using
appliances connected to this product.
Package contents
• All-in-one adapter and converter combo unit
• Quick Setup Guide
Instructions for use
Warning: Indoor use only!
Most foreign countries operate on 220 V/240 V. Most appliances sold in
the U.S. are manufactured to operate on 110 V/120 V. This converter
converts the voltage system. Appliances that operate on 110 V/120 V will
not work in most parts of the world where the voltage is 220 V/240 V.
Your all-in-one adapter/converter makes it possible to use most of your