Viking QSC200SS Installation Manual
C4 outdoor cooker cart assembly
Hide thumbs
Also See for QSC200SS:
- Use & installation manual (6 pages) ,
- Manual (52 pages) ,
- User manual (35 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Viking QSC200SS
Summary of Contents for Viking QSC200SS
- Page 1 Viking Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.com ™ Outdoor Cooker Cart Assembly F20293B EN (040308J)
-
Page 2: Important: Please Read And Follow
IMPORTANT: PLEASE READ AND FOLLOW 5. With a minimum of two people, place the cooker on the cooker shelf located in the cart. Also, make sure the cooker is placed on the mounting bracket located on the cart directly under the hinge. The hinge and the inside 1. -
Page 3: Cart Dimensions
Cart Door Adjustment (41” W. Model only) CART DIMENSIONS The cart door comes adjusted from the factory. Depending on how level the surface the cart is being placed on, the door may need to be adjusted after the grill is assembled on the cart. 30”... - Page 4 30” W. Cart - Top 41” W. Cart - Front 61-3/4” (156.7 cm) 73-3/8” (186.4 cm) 29-7/16” (74.8 cm) 50-1/2” (128.3 cm) 41-1/4” (104.8 cm) 37-1/2” (95.3 cm) 36-1/2” (92.7 cm) 53-1/8” (134.9 cm) 44-5/8” (113.5 cm) 41” W. Cart - Side 33-3/8”...
-
Page 5: For Your Safety
U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339, NOTE: If using a Viking GSH12 flexible hose, remove the 3/8” flare adapter and attach hose to the the 1/2” (1.3 cm) male Cylinders, Spheres, and Tubes for the Transportation of Dangerous Goods. - Page 6 October 1, 1998 and will ensure that the tank is not overfilled. The LP/Propane flare adaptor or Viking tank should be a standard 5-gal, 20 lb. gas cylinder tank approximately 12” in diameter and 18” high which must be GSH12 constructed and marked in accordance with the Specifications for LP/Propane Gas Cylinders of the U.S.
-
Page 7: Leak Testing
LEAK TESTING BURNER ADJUSTMENT Although all gas connections on the grill are leak tested at the factory prior to shipment, a complete gas tightness check Each burner is tested and adjusted at the factory prior to shipment; however, variations in the local gas supply may make it necessary to adjust the burners.
Need help?
Do you have a question about the QSC200SS and is the answer not in the manual?
Questions and answers