Lexmark CX310 Quick Reference page 11

3 Open the front door.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.
a If there is a jammed paper under the fuser, then firmly grasp
the paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
b
Pull the green lever to open the fuser cover.
c
If there is a jammed paper in the fuser, then hold down the
fuser cover, and then remove the paper.
Note: Make sure all paper fragments are removed.
11
4
Slide and hold the release latch on the right side of the printer, and
then slowly close the top door.
1
2