Intel Desktop Board DQ45EK Technical Product Specification
1.2
Legacy Considerations
This board differs from other Intel Desktop Board products, with specific changes
including (but not limited to) the following:
•
No parallel port
•
No floppy drive connector
•
No parallel ATA IDE connector
•
No serial port on the back panel
•
No PCI Conventional connector
•
The serial port header is located near the memory sockets and may require a
specialized chassis or cabling solution to use
1.3
Online Support
To find information about...
®
Intel
Desktop Board DQ45EK
Desktop Board Support
Available configurations for the Intel
Desktop Board DQ45EK
Supported processors
Chipset information
BIOS and driver updates
1.4
Processor
The board is designed to support the following processors:
•
Intel Core 2 Quad processor (65 W) in an LGA775 socket
•
Intel Core 2 Duo processor in an LGA775 socket
•
Intel Pentium Dual-Core processor in an LGA775 socket
•
Intel Celeron Dual-Core processor in an LGA775 socket
•
Intel Celeron processor Sequence 400 in an LGA775 socket
Other processors may be supported in the future. This board is designed to support
processors with a maximum wattage of 65 W. The processors listed above are only
supported when falling within the wattage requirements of the board. See the Intel
web site listed below for the most up-to-date list of supported processors.
For information about...
Supported processors
CAUTION
Use only the processors listed on the web site above. Use of unsupported processors
can damage the board, the processor, and the power supply.
14
Visit this World Wide Web site:
http://www.intel.com/products/motherboard/DQ45EK/index.htm
http://support.intel.com/support/motherboards/desktop
http://www.intel.com/products/motherboard/DQ45EK/index.htm
http://processormatch.intel.com
http://www.intel.com/products/desktop/chipsets/index.htm
http://downloadcenter.intel.com
Refer to:
http://processormatch.intel.com