Gps Data - Nokia C6-00 User Manual

Select Options and from the following:
New landmark — Create a new
landmark. To request position
information of your current location,
select Current position. To enter the
position information manually, select
Enter manually.
Edit — Edit a saved landmark (for
example, add a street address).
Add to category — Add a landmark to a
category. Select each category to which
you want to add the landmark.
Send — Send one or several landmarks to
a compatible device.
Create a new landmark category
On the categories tab, select
Edit categories.

GPS data

GPS data is designed to provide route
guidance information to a selected
destination, position information about
your current location, and traveling
information, such as the approximate
distance to the destination and
approximate duration of travel.
Select Menu Applications
>
and GPS data.
Route guidance
Route guidance shows the straightest
route and the shortest distance to the
destination, measured in a straight line. It
ignores any obstacles on the route, such
as buildings and natural obstacles, or
differences in altitude. Route guidance is
active only when you move. Start the
route guidance outdoors to receive the
necessary information from the satellites.
Select Menu Applications
>
and GPS data > Navigation.
64
Set your destination
Select
landmark as the destination, or enter the
latitude and longitude coordinates.
Clear the destination
Select
Retrieve position information
of your current location and an estimate
of the accuracy of the location.
Select
and
Save your current location as a
Options
>
landmark
Select
Landmarks can be used in other
compatible applications and transferred
between compatible devices.
Trip meter
the distance, speed, and time of your trip.
Use the trip meter outdoors to receive a
better GPS signal.
Location
>
Select
and
Start calculating the trip distance
Select
values remain on the display.
Start a new calculation
Select
distance and time and average and
maximum speeds to zero.
Set the odometer and total time to
zero
Location
>
Select
Options Set destination
>
Stop navigation
You can view the position information
Menu Applications
>
GPS data > Positioning.
Options Save
>
With the trip meter, you can calculate
Menu Applications
>
GPS data Trip
>
Options > Start. The calculated
Options > Reset. This sets the trip
Options > Restart.
© 2010 Nokia. All rights reserved.
and a
Location
>
position.
Location
>
distance.