Nokia C6-00 User Manual page 105

Q: Why can't I end a Bluetooth
connection?
A: If another device is connected to your
device, you can close the connection from
the other device or deactivate Bluetooth
connectivity in your device. Select
Menu Settings
>
Bluetooth Bluetooth
>
Q: Why can't I see a wireless LAN
(WLAN) access point even though I
know I'm within its range?
A: The WLAN access point may use a
hidden service set identifier (SSID). You
can only access networks that use a
hidden SSID if you know the correct SSID
and have created a WLAN access point for
the network on your Nokia device
Q: How do I turn the wireless LAN
(WLAN) off on my Nokia device?
A: The WLAN on your Nokia device is
deactivated when you are not connected
or trying to connect to another access
point, or not scanning for available
networks. To further reduce battery
consumption, you can specify that your
Nokia device does not scan, or scans less
often, for available networks in the
background. The WLAN is deactivated in
between background scans.
To change the background scan settings,
do the following:
1 Select Menu
Connectivity
2 To increase the background scan time
interval, adjust the time in Scan for
networks. To stop background scans,
select Show Wi-Fi availability
Never.
© 2010 Nokia. All rights reserved.
and Connectivity
> Off.
Settings and
>
> Wi-Fi.
3 To save your changes, select Back.
When
to Never, the WLAN availability icon is
not displayed in the home screen.
However, you can still manually scan
for available WLAN networks, and
connect to WLAN networks as usual.
>
Q: What do I do if the memory is full?
A: Delete items from the memory. If
enough memory to perform operation.
Delete some data first.
Delete some data from phone
memory.
deleting several items at the same time,
delete items one by one, beginning with
the smallest items.
Q: Why can't I select a contact for my
message?
A: The contact card does not have a phone
number, address, or e-mail address. Select
Menu
>
contact, and edit the contact card.
Q: How can I end the data connection
when the device starts a data
connection again and again?
A: The device may be trying to retrieve a
multimedia message from the
multimedia message center. To stop the
device from making a data connection,
select Menu
Options
message
Manual to have the multimedia
messaging center save messages to be
retrieved later, or
incoming multimedia messages. If you
select Manual, you receive a notification
when you have a new message in the
>
multimedia message center. If you select
Off, the device does not make any
Show Wi-Fi availability
or
is displayed when you are
Contacts and the relevant
Messaging
>
Settings Multimedia
> >
Multimedia retrieval. Select
>
Off to ignore all
is set
Not
Memory low.
and
105