NETGEAR WNR1000v3 - Wireless- N Router User Manual page 46

command in an MSDOS command prompt window displays the MAC address as
ipconfig/all
Physical Address. You might also find the MAC addresses in the router's Attached Devices
screen.
To restrict access based on MAC addresses:
1. Select Wireless Settings under Advanced in the main menu.
2. In the Advanced Wireless Settings screen, click Setup Access List to display the Wireless
Card Access List.
Figure 2-11
3. Click Add to add a wireless device to the wireless access control list. The Wireless Card
Access Setup screen opens and displays a list of currently active wireless cards and their MAC
addresses.
Figure 2-12
Safeguarding Your Network
Wireless-N 150 Router WNR1000v3 User Manual
v1.0, February 2010
2-19