EchoStar Over-the-Air Module MT2 User Manual page 6

4. Connect the cable from your over-the-air antenna to the O
A A
IR NTENNA
is needed because the module has an internal splitter to provide the
dual-OTA tuner capability.
Figure 3. Connecting the Over-the-Air Antenna
5. Plug the receiver's power cord into the electrical outlet. Turn the
receiver back on after it has reset itself.
I port on the module (see Figure 3). Only one cable
N
TO
OVER-THE-AIR
ANTENNA
- -
VER THE
Page 5