Bluetooth And Wi-Fi; Connect A Bluetooth Headset; Connect To Wi-Fi; Connect To An At&T Wi-Fi Hot Spot - HTC Tilt 2 Quick Start Manual

Bluetooth and Wi-Fi

Connect a Bluetooth headset

1. Turn on and make visible the Bluetooth
headset and place it within close range.
Refer to the headset's documentation to
learn how to set it to visible mode.
. On the Home screen, slide to the Settings
tab, and then touch Menu > Bluetooth
Devices. If prompted to turn on Bluetooth,
touch Yes.
3. Touch the Settings tab (
touch Add a device.
4. When the name of your headset appears
in the list of detected devices, touch the
name, then touch Select. The device will
automatically pair the device with the
Bluetooth headset. The
on the title bar.
Note: Windows Mobile will automatically try
one of the preconfigured passcodes
(0000, 8888) to pair the Bluetooth
headset with the device. If this fails, you
have to enter the passcode delivered
with your headset manually.
You can use a Bluetooth headset to
listen to music on your device.

Connect to Wi-Fi

1. On the Home screen, slide to the Settings
. Touch Wi-Fi. Detected wireless networks
3. Tap the desired Wi-Fi network. If you select
), and then
Note: Wi-Fi networks are self-discoverable,
icon will show
Connect to an AT&T Wi-Fi
Hot Spot
To connect to an AT&T Wi-Fi Hot Spot when
you are within range, on the Home screen,
slide to the AT&T tab, tap AT&T Wi-Fi, and then
follow the on-screen instructions.
tab, then touch Communications.
are displayed on the screen.
an open (unsecured) network, you are
automatically connected to the network.
If you select a secured network, enter the
security key and then tap Done. You are
then connected to the network.
which means no additional steps are
required for your device to connect to
a Wi-Fi network. It may be necessary to
provide a username and password for
secured wireless networks.
31