Oven Diagram - Sharp R-204EWA Service Manual

15 or 20 amp. fused electrical supply. It is recommended that a separate circuit
serving only this appliance be provided. When installing this appliance, observe all
applicable codes and ordinances.
A short power-supply cord is provided to reduce risks of becoming entangled in or
tripping over a longer cord.
Where a two-pronged wall-receptacle is encountered, it is the personal responsibil-
ity and obligation of the customer to contact a qualified electrician and have it
replaced with a properly grounded three-pronged wall receptacle or have a
grounding adapter properly grounded and polarized. If the extension cord must be
used, it should be a 3-wire, 15 amp. or higher rated cord. Do not drape over a
countertop or table where it can be pulled on by children or tripped over accidentally.
CAUTION: DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE ROUND GROUNDING PRONG FROM
THIS PLUG.
11
2 1
NOTE:
The directed features are disabled after one minute when the
oven is not in use. These features are automatically enabled
when the door is opened and closed or the STOP/ CLEAR pad
is pressed.

OVEN DIAGRAM

9 8 10
3
5
4
TOUCH CONTROL PANEL
1. Oven door with see-through window
2. Safety door latches
3. Door hinges
4. Door seals and sealing surfaces
5. Turntable motor shaft
6. Removable turntable support
12
7. Removable turntable
7
8. Ventilation openings (Rear)
13
9. Oven lamp
10. Wave guide cover
6
11. Door open handle
12. Control panel
13. Power supply cord
Time display
Indicators
See NOTE.
See NOTE.
5
Grounded
Receptacle Box
3-Pronged
Plug
Grounding Pin
3-Pronged Receptacle
ON DEF. LBS. QTY. CHECK
EXPRESS MINUTE
DEFROST PLUS
POWER TIMER
CLOCK
LEVEL
STOP
CLEAR
R-204EWA