Store Fm Radio Stations Manually; Select A Preset Radio Station; Other Features; Set Alarm Timer - Philips FWM400D/37 User Manual

Store FM radio stations
manually
1
Tune to an FM radio station.
2
Press PROG.
» The preset number begins to blink.
3
Press / repeatedly to select a preset
number.
4
Press PROG again to confirm.
5
Repeat Steps 1 to 4 to store other stations.
Note
•
To remove a pre-stored station, store another station
in its place.

Select a preset radio station

In tuner mode, press
a preset radio station.
EN
14
/ repeatedly to select

7 Other features

Set alarm timer

This Hi-Fi system can be used as an alarm clock.
For alarm source, you can select disc, tuner, USB
or iPod/iPhone.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIMER
until [SET TIMER] (set timer) appears.
» [SELECT SOURCE] (select source)
scrolls on the display.
2
Press source selection keys to select an
alarm source: DISC, TUNER, USB or
iPhone/iPod.
3
Press TIMER to confirm.
» The hour digits blink.
4
Press / to set the hour.
5
Press TIMER to confirm.
» The minute digits blink.
6
Repeat steps 4-5 to set the minute.
To activate or deactivate the alarm timer:
In standby mode, press TIMER repeatedly.
» The alarm icon appears if the alarm timer
is activated.
Note
•
When alarm sounds, you can adjust volume by pressing
VOL +/-.
•
If Disc/USB/iPod/iPhone is selected as alarm source,
while no disc is inserted or no USB/iPod/iPhone
connected, the system switches to tuner source instead.