Menu Options Buttons And Screens - LG DLEX6001V Owner's Manual

MENU OPTIONS BUTTONS AND SCREENS

These buttons are used for setup, connectivity and on-screen
guides.
NOTE
Pressing the arrow keys or swiping will allow you to access the
buttons.
The volume of the tones and signals can be adjusted using either
the volume graphic in the center of the volume screen, or by
The brightness of the screen can be adjusted using either the
brightness graphic in the center of the brightness screen, or by
touching the + or – buttons.
Touch the Language button to select the desired on screen
language: English, Spanish or French. Touch the OK button when
finished.
Select the Display Options button to change the Home Screen.
This selection determines which screen is displayed when the
power is turned on or a cycle is canceled. Touch the OK button
when finished.
Wi-Fi
Wi-Fi connectivity allows you to use the many connectivity
features of this appliance. The dryer must be connected to a Wi-Fi
network before connectivity features can be used. Touch the Wi-
Fi button to set up Wi-Fi or to turn it On/Off. Refer to the Smart
Appliance Connectivity section.
To use the connectivity features of your appliance, you must first
create a user ID and password at the LG Smart TinkQ website
(http://us.smartthinq.com). Once that is completed, use the
Product Registration screen to register your appliance to your
online account for automatic updates and to access special cycles
that can be downloaded. Registering your product allows the
system to identify your appliance in order to give you the right
cycles. Refer to the Smart Appliance Connectivity section.
The Flowsense system in the dryer continuously monitors the
condition of the home exhaust system. If a partial restriction is
detected, the Flowsense icon on the home screens will show two
lighted bars. If the restriction is severe, four bars will be lighted,
and the system should be serviced immediately.
The INSTALLATION screen provides you with basic step-by-
step installation instructions. Always refer to the Installation
Instructions in the owner's manual for complete safety and
installation instructions.
Select the Factory Reset button to clear all settings and return the
appliance control to the original settings. Using this feature will
erase all Custom Cycles, Wi-Fi settings, Recent cycles, etc.
If your utility company has equipped your home with a
smart meter, you will need to contact the utility company for
smart grid features. Your utility company can provide you with
information regarding the features and capabilities of the meter
and the utility. You will need to work with your utility for initial
setup.
35
HOW TO USE