Sharpening Blades - Echo 99944200590 , SRM-2100SB/2400SB SRM-210SB/211SB SRM-260SB/261SB PAS-2100/2400 PAS-210/211 PAS-230/231, PAS-260/261, PAS-2601 Operator's Manual

SHARPENING BLADES

Level 3.
Tools required: Flat file, round file, screwdriver
Parts required: None
WARNING
Hedge Clipper Blades are very sharp. Wear gloves to protect
hands.
1. Disconnect spark plug wire from spark plug.
2. Slide blades to allow file clearance using slots (A) on bottom of
blades. Do not pry against cutting edges.
3. Follow the original shape, and file each cutting edge carefully to
avoid damage to adjacent teeth. Maintain 6 mm (.25 in.) radius at
base of each tooth.
IMPORTANT
If a power grinder is used, DO NOT allow blade to over heat.
4. Lubricate blades. See "Lubrication" on page 11.
5. Connect spark plug wire.
PAS A
RTICULATING
DANGER
H C
EDGE LIPPER
O
PERATOR
A
A
TTACHMENT
' M
S ANUAL
A
6mm (.25 in.) Radius
º
45
13