Tascam X-48MKII Owner's Manual page 56

9 – Appendix
Main unit settings menu
Auto Chase
One Button Record
One Button Rehearse
Update Punch Points
Track Key Punch
Use Pre/Post-Roll
Pre-Roll
Post-Roll
TimeCode Display
Mixer Bypass
Loop Mode
AES 2X Mode
S/PDIF Input SRC
S/PDIF Pro Mode
PREF Auto Input
Punch Crossfade
EDL Crossfade Shape
Overload LED Time
Audio File Naming
Auto Save
Auto Save Time
P2 Track Arm
P2 Punch Delay
P2 Chase Control
Meters
Looping
Scrolling
Load Last Project
Settings
Midi Device ID
SYS
Network
About
56
TASCAM X-48MKII
Turn Auto Chase mode ON/OFF
Enable recording with just the record button
Enable activating rehearsal mode with just the rehearsal button
Set whether or not punch-in and punch-out point settings are
automatically updated when starting and stopping recording
Set whether REC keys 1-48 can be used to punch-in and punch-out
Turn pre-roll and post-roll ON/OFF
Set the pre-roll time
Set the post-roll time
Set the time axis display unit
Turn mixer bypass mode ON/OFF
Select the loop playback method
Set the AES/EBU card transmission mode when using 2x sampling
frequencies.
Turn the S/PDIF input sampling rate converter ON/OFF
Set the S/PDIF input professional mode
Select the auto input mode
Set the crossfade time when punch recording
Set the EDL crossfade shape type
Set how long the (overload) indicator lights
Set how names are given automatically to audio clips
Turn the EDL automatic saving function ON/OFF
Set the time interval between when saving when using EDL automatic
saving
Set whether or not tracks can be armed over the Sony 9-pin connection
Set the amount of delay until execution after receiving a punch-in
command over the Sony 9-pin connection
Set the target chase source (LTC or MMC) when commanded to chase
from the Sony 9-pin port.
Make various meter display settings
Turn loop playback ON/OFF
Set track screen scrolling
Set whether or not to load the project that was in use the last time the
unit was shut down
View and save system settings
Set the MIDI device ID
Make various address settings for the LAN network
Show the software version
Description