CONTROL PANEL ASSEMBLY
Control Panel
Frame
Housing
Hook
Plate
When you disassemble the control panel, be
sure to take gloves and careful panel frame's
edge. Failure to do so can cause serious injury.
Cap
1.
2.
Push the housing hook and disassemble the
control panel assembly.
3.
Remove the plate by lifting it up slightly.
4.
Remove 6 screws on the PWB(PCB)
assembly, display.
36
WARNING !
!
Push the cap on the right side of control
panel.
Remove the screw.
Slide the control panel to the right about
an inch.
WARNING!
!
Be careful of dropping the control panel.