Table of Contents
Advertisement
4-8
Boot Menu
Boot Configuration
Configure settings during system boot.
Quiet Boot
This setting is to show POST message during POST process, if not, then it
will show OEM logo.
Setup Prompt Timeout
Number of seconds to wait for setup activation key.
Bootup NumLock State
This setting is to set the Num Lock function when the system is powered on.
Setting to On is to activate the Num Lock function when the system is
powered on. Setting to Off is to disable the Num Lock function, and the
direction arrow keys on the numeric keypad will be enabled.
Set Boot Priority
These items showing the sequence of boot devices where BIOS attempts
to load the disk operating system.
Advertisement
Table of Contents
