Creating Or Restoring An Efi Partition On The Hard Drive; Efi Partition Errors - HP 2730p - EliteBook - Core 2 Duo 1.86 GHz Manuallines

Creating or restoring an EFI partition on the hard drive

Use the following steps to create an EFI partition and install EFI-related SofPaqs onto the partition:
Use Partition Magic to create a partition on a local hard drive that has a System partition with
1.
the following characteristics:
Partition type: FAT32
Partition size: 1 GB
Volume name: HP_TOOLS
In the new partition, create a folder called HEWLETT-PACKARD.
2.
In the HEWLETT-PACKARD folder, create the following folders:
3.
- QuickLook
- SystemDiags
- BIOS
In the BIOS folder, create a Current subfolder
4.
Download the EFI SoftPaqs for QuickLook, System Diagnostics, and BIOS to the operating system
5.
partition. SoftPaqs are available from
Verify that the Softpaqs run and unbundle into the C:\swsetup directory.
6.
Verify that the EFI application is installed in the correct location in the FAT32 partition (for
7.
example, QuickLook.efi and QuickLook.sig should be in ...\HEWLETT-PACKARD\QuickLook\).
Verify that all EFI applications have signature (.sig) files.
8.
Verify that each application works properly after installation.
9.

EFI partition errors

If the EFI application launch keys fail to operate, the partition may have become corrupt. Reinstall
the application using the related SoftPaq from http://www.hp.com/support. If a reinstalled EFI
application does not work after reinstallation, contact technical support.
The following errors may be displayed if a problem occurs when launching EFI applications:
EFI Partition not found: can't find EFI FAT32 partition starting with HP_TOOLS.
Application not found: can't find EFI application in directory.
Invalid signature: BIOS fails to verify the signature of the EFI application.
If there is a backup version of the application in BIOS flash (for example, HP System Diagnostics).
BIOS will launch the backup. Otherwise, BIOS displays an error message.
http://www.hp.com/support.
6