Fujitsu FPCR46001 User Manual page 92

2
From the Boot Menu that appears, check whether the <Recovery and Utility> option is present. If it is not
present, it means that the utility must be used from the disc. Proceed to "Running Recovery and Utility from the
Bootable Disc" if <Recovery and Utility> is unavailable.
Running Recovery and Utility from hard disk
1
Turn on or reboot your system. When the Fujitsu logo appears, press [F12] key.
2
Cursor down to <Recovery and Utility> and press the [Enter] key.
3
While the files are being loaded from the disc, a progress bar will appear at the bottom of the screen.
4
When the System Recovery Options dialog opens, select a new keyboard layout, if necessary, then click [Next].
5
When the Operating System dialog appears, select "Use recovery tools...", then click [Next].
6
If necessary, enter your password, then click [OK].
7
When System Recovery Options window appears, click on Recovery and Utility.
8
The Recovery and Utility screen appears on the screen with three tabs: Diagnostics, Recovery and Utility.
Please note that Diagnostics tab is not supported on certain LIFEBOOK/Stylistic models when running
Recovery and Utility from the hard disk. In order to restore the operating system, please use the middle icon
"Restoring the Factory Image (only C:\drive)" under the Recovery tab.
Running Recovery and Utility from the Bootable disc
To verify/change boot-up priority (rather than booting-up from a hard drive or external floppy drive), perform the following steps:
T
HE BOOTABLE DISC CAN ONLY BE USED WITH THE SYSTEM WITH WHICH IT WAS PURCHASED
1
Power on your system. When the Fujitsu logo appears on the screen. press the [F12] key.
2
Select the Boot Menu from the menu that appears.
3
Highlight the CD/DVD option and move it to the top of the list using the up arrow.
4
Insert the bootable disc into the drive tray.
5
Click [OK]. While the files are being loaded from the disc, a progress bar will appear at the bottom of the screen.
6
When the System Recovery Options dialog opens, select a new keyboard layout, if necessary, then click [Next].
86 - Restoring Your Pre-installed Software
.