Fujitsu FPCR46001 User Manual page 54

U
SING HEAVY CURRENT DEVICES OR FREQUENT
CHARGING COMPLETELY
Low Battery State
When the battery is running low, a low battery notification message will appear. If you do not respond to
the low battery message, the batteries will continue to discharge until they are too low to operate. When
this happens, your notebook will go into Standby mode. There is no guarantee that your data will be saved
once the notebook reaches this point.
O
NCE THE LOW BATTERY NOTIFICATION MESSAGE APPEARS
LIFEBOOK
YOUR
SHOULD PROVIDE A CHARGED BATTERY
POSSIBLE
W
HEN YOU ARE IN
REMOVE ALL POWER SOURCES WHILE YOUR
NOT BEEN SAVED TO THE HARD DRIVE WILL BE LOST
Once your notebook goes into Dead Battery Suspend mode you will be unable to resume operation until
you provide a source of power either from an adapter, or a charged battery. Once you have provided power,
you will need to press the Power/Suspend/Resume button to resume operation.
In the Dead Battery Suspend mode, your data can be maintained for some time, but if a power source is
not provided promptly, the Power indicator will stop flashing and go out, resulting in loss of the data that
was not stored. Once you provide power, you can continue to use your notebook while an adapter is
charging the battery.
Shorted Batteries
The Status Indicator panel uses an LED below the battery outline of the Battery Level indicator to display
the operating level available in that battery. If this display shows a Shorted Battery, it means the battery is
damaged and must be replaced so it does not damage other parts of your LIFEBOOK notebook.
.
S
NOTEBOOK INTO TANDBY MODE UNTIL YOU CAN PROVIDE A NEW POWER SOURCE
.
S
TANDBY MODE THERE MUST ALWAYS BE AT LEAST ONE POWER SOURCE ACTIVE
48 - Lithium ion Battery
DVD/CD-RW/CD-ROM
,
YOU NEED TO SAVE ALL YOUR ACTIVE DATA AND PUT
, AC ,
AN POWER ADAPTER OR
LIFEBOOK
NOTEBOOK IS IN
.
ACCESSES MAY PREVENT
A /A
UTO IRLINE ADAPTER AS SOON AS
S ,
TANDBY MODE ANY DATA THAT HAS
. Y
OU
. I
F YOU