Dell PowerConnect Zeiss 7048 Getting Started Manual page 93

( 5
[0.0.0.0]: 10.1.1.1
SNMP = "public"@10.1.2.100
= ********
IP = DHCP
VLAN1
= 10.1.1.1)
Step 6:
If the information is correct, please enter (Y) to
save the configuration and copy the settings to the
start-up configuration file. If the information is
incorrect, enter (N) to discard the configuration and
restart the wizard: [Y/N] y
Thank you for using the Dell Easy Setup Wizard.
You will now enter CLI mode.
Applying Interface configuration, please wait ...
( 6
Dell
= admin
IP = 10.1.1.200 255.255.255.0
(Y)
(N)
...)
IP
[Y/N] y
CLI
91