Block - Sharp LC-26DV20U - 26" LCD TV Operation Manual

Useful adjustment settings
Press TV MENU and the MENU screen
displays.
Press 4/1_ to select _ (LOCKS).
Press A/Y. The password entering menu
displays.
Input the 4-digit password by using 0-9,
then press ENTER.
The LOCKS menu displays.
Press A/V to select "V-CHIP SET", then
press 4/_. The V-CHIP SET menu displays.
Press A/Y to select "CAN ENG RATING".
Then press _1/1_to select the desired rating.
Repeat steps 1 to 5 in Canadian English
ratings.
Press A/V to select "CAN FRE RATING".
Then press "_/1_ to select the desired rating.
V-CHIP SET
TV RATING OFF
MOVIERATING
CARENGRATING OFF
t_ :SELECT L $_:ADJUST
• See page 37 for setting details.
Press EXIT to return to the normal screen.
V-CHIP SET
TV RATING OFF
MOVIE RATING
CAN FRERATING OFF
I_1:SELECT {_ :ADJUST
• See page 37 for setting details.
Press RETURN, The LOCKS menu
displays,
Press A/Y to select "V-CHIP", then press 4/
I_ to select "ON".
Your setting are now set into memory.
• If"V-CHIP" is not set to "ON", the V-CHIP setting
will not work.
LOCKS
V-CHIPSET
V-CHIPSET(DTV}
NEWPASSWORD
t._:SELECT i_ :ADJUST
The V-CHIP block is working and censors
a broadcast, "THIS PROGRAM HAS BEEN
BLOCKED!" displays.
Press MUTE while the V-CHIP is working
and then the password entering menu
displays.
Enter your 4-digit password with 0-9.
At this time V-CHIP block temporarily
releases.
You can reactivate the temporarily released V-CHIP
block as shown below.
Method 1 :
Change to the other channel.
Method 2:
Switch off the TV/DVD power.
• Performing any of the two above will activate the V-CHIP
block.
Press EXIT to return to the normal screen.
(_)= 38