Sharp LC-26DV20U - 26" LCD TV Operation Manual page 20

Watching TV
Allows you to set a time when the TV/DVD
automatically switches to standby.
POWER
DISPLAY TV/DVD EJECT
SLEEP VIEWMODE INPUT
CDCD
Each time you press SLEEP, the remaining
time setting switches as shown below.
SLEEP 1_
0h00m
(Sleeptimeroff)
SLEEP ]
0hl0m
step up by 10 minutes
SLEEP 1
lh50m
SLEEP 1
2h00m
This display will disappear after a few
seconds, the sleep timer automatically
starts counting down.
• If you want to adjust the sleep timer again, you
can press SLEEP repeatedly then change the
time setting.
Press SLEEP.
• The remaining time displays when the sleep
timer has been set.
SLEEP 1
OhO7rn
• Select "0h00m" by pressing SLEEP repeatedly to cancel
the sleep timer.
• The TV/DVD will enter the standby mode when the
remaining time reaches zero.
(_)- 20
The TV/DVD has a feature that allows reception of
sound other than the main audio for the program.
This feature is called Multi-channel Television Sound
(MTS). The TV/DVD with MTS can receive mono
sound, stereo sound and Secondary Audio Programs
(SAP). The SAP feature allows a TV/DVD station to
broadcast other information, which could be audio in
another language or something completely different
like weather information.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
• SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
if stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to
fixed mono-sound mode.
• MTS only operates while in TV mode.
• When the TV receives a stereo or SAP broadcast, the
word "STEREO" or "SAP" displays on-screen every time
you turn the TV/DVD on, change the channel, or press
DISPLAY.
SETUP/TV MENU DVDMENU
AUDIO PLAYMODEANGLE ZOOM
Changing MTS
You can change MTS as shown below to match the
television broadcast signal.
Press AUDIO and the #_ (AUDIO) menu
screen displays. "MTS" Will be highlighted.
Press AUDIO again or _/_ to select "STR
'STEREO)", "SAP" or "MONO".
AUDIO
BASS 25
TREBLE 25
BALANCE O
SPEAKERS ON
V
{_:SELECT _LADJUBT
Press EXIT to return to the normal screen.