Canon I470D - i Color Inkjet Printer Printing Manual page 38

Error Number/Problem
403
The print head is faulty.
611
A specified period of time
has lapsed without
receiving a response from
the digital camera.
612
This printer is not ready for
the connected digital
camera or digital video
camcorder.
802/804/806/807/808/809
An error requiring a
service may have
occurred.
If the Same Error Persists
If the same error persists after a countermeasure is taken according to the above error number, turn
off the printer, remove the power cord plug from the outlet, plug the power cord back in, and then
turn on the printer again.
An Error Icon is Displayed on the Operation Panel.
Error Icon/Problem
stays lit.
The memory card is
inserted incorrectly.
is flashing.
The memory card cannot
be read.
The ? mark is displayed
beside the ink tank icon.
An ink counter has not
been reset after
replacement of the
relevant ink tank.
36
Turn off the printer by pressing the Power button, then turn on the
printer again.
If the same error persists, the print head may be faulty. Contact a
Canon service representative.
Press the Resume button.
The digital camera will automatically turn on. If not, turn it on.
Disconnect the camera connection cable, press the Resume button,
and then connect the cable once more.
If the error is still unresolved, there is a possibility that you are using a
digital camera or digital video camcorder that is not supported by this
printer.
Connect a Canon "Bubble Jet Direct" compatible digital cameras or
digital video camcorders.
Turn off the printer, remove the power cord plug from the outlet, plug
the power cord back in, and then turn on the printer again.
If the same error persists, contact a Canon service representative.
Insert an available memory card after checking its orientation. See
"Using a Memory Card" on page 6.
If a memory card has already been inserted, remove it and then insert
it again. Next, check that the Indicator lamp stays on.
Never remove the card while image data is being read (the Indicator
lamp is flashing).
Image data edited/processed on the computer must also be printed
from the computer.
After replacing an ink tank with a new one, reset the relevant ink
counter. See "Replacing an Ink Tank" on page 31.
Try This
Try This