Maxtor OneTouch II User Manual page 9

If you have chosen not to install Retrospect, eject the Install
CD and go directly to "Step 2. Connect the Drive" on
page 8.
If you have chosen to install Retrospect, please do not
eject the Install CD and go to the next step.
12. Click Next.
You may see a message that the Microsoft.NET software
will be installed on your computer. If so, follow the onscreen
instructions to complete the installation.
The Retrospect Express HD Server welcome screen will appear.
13. Click Next.
The License Agreement screen will appear.
14. After reading the agreement, select "I accept..." and click Next.
The Customer Information screen will appear.
15. Enter your User Name and Organization.
Make your choice and click Next.
16. Fill in your information and click Next.
The Setup Type screen will appear.
17. Choose the Recommended option to install all of the
Retrospect Software (recommended). If you choose the
Custom option, you will choose individual components and
specify an install location before the installation begins.
If you do not install Retrospect Express HD Server, you will
not be able to use it with the OneTouch backup feature
described later in this guide.
Make your choice and click Next.
The Ready to Install screen appears.
18. If you're ready to install the Retrospect software, click Install.
After the software is installed on your computer, the message
"InstallShield Wizard Completed" will appear.
19. Click the Finish button.
If a message appears asking you to restart, follow the
on-screen directions to restart your computer.
The Welcome to Maxtor OneTouch Setup screen will appear and
a Maxtor OneTouch shortcut icon will appear on your desktop.
20. Please remove the Maxtor Install CD from your computer.
21. Proceed to the next section: Connect the Drive.
Installing Your Drive 7
2