Validation Paper Handling - Epson U325PD - TM B/W Dot-matrix Printer User Manual

Validation Paper Handling

Notes:
Use only validation paper that matches the printer's specifications.
See Paper Specifications in Chapter 4.
Be sure that a paper roll is loaded before you use validation paper.
Be sure that the validation paper is flat, without curls, folds, or
wrinkles.
1. Send appropriate control commands from the computer to
print on validation paper.
2. When the VALIDATION light flashes, insert the validation
paper into the validation paper inlet using the right edge of the
validation paper inlet as a guide. (Follow steps ➀ and ➁ in the
illustration.)
3. Make sure you insert the validation paper into the inlet as far as
it will go.
4. When the validation paper is detected by the sensor, the
VALIDATION light is changed from flashing to on and the
paper is automatically drawn into the printer and printing
begins.
5. When the VALIDATION light begins flashing after printing,
remove the validation.
2-4 Using the Printer
2
1