Economic Dishwashing - Asko D5954 Operating Instructions Manual

Economic dishwashing

Run programs only with a full load
Wait until the dishwasher is fully loaded before running a
program, this way you save energy. Use the Rinse & Hold
program to rinse the dishes if there are any unpleasant
odors while you wait for the dishwasher to become fully
loaded.
Run programs at a lower
temperature
If the dishes are only lightly soiled, you can select a lower
temperature with certain programs. See also the section
Select options in the chapter Dishwashing.
Select a program with Short dry
To save energy, use Short dry. The drying result will be
better if, once the program is finished, you leave the door
slightly open.
Do not rinse under running water
Simply scrape off large food particles before loading the
dishwasher.
Choose a green detergent
Read the environmental declaration on the packaging!
Connect to cold water...
If you use oil or electricity to heat your home.
Connect to hot water (max. 160 °F
(70 °C))...
If you use district heating, solar power, or geothermal
power to heat your home. Choosing a hot water
connection cuts program times and reduces the
dishwasher's electricity consumption.
12 Customer Care Center
1-800-898-1879
www.askousa.com