Advertisement
Step2. How to upgrade the firmware
[1] Turn the TV on.
[2] Insert the USB Memory Drive containing the Software into the
USB port on the side (or rear) of the TV.
[3] Press the MENU button to display the menu. Press the ▲ or ▼
button to select "Support", then press the ENTER button.
[4] Press the ▲ or ▼ button to select "Software Upgrade", then
press the ENTER button.
[5] The message "Scanning for USB... It may take more than 1
minute." is displayed.
Scanning for USB... It may take more than 1 minute.
[6] Then, the message "Upgrade Version XXXX to version XXXX?
The system will be reset after upgrade." is displayed.
Select "Yes", then press the ENTER button.
And then software is upgraded automatically.
Upgrading now. Please do not disconnect USB before
upgrade is completed.
[7] When the Software upgrade is complete; the TV will turn off and then back on by itself.
Upgrade is completed. Power will be off 3
seconds from now and turned on automatically.
3. How to Connect TV and Wireless Audio with Dock
[1] Turn on the TV and Wireless Audio with Dock.
[2] TV menu ; System ; Device manager ; SoundShare Settings ; Add New Device ;
Switch the option to 'On' from 'Off'
[3] Switch the Function of Wireless Audio with Dock to TV mode.
[4] The message asking whether to proceed the Bluetooth connection is displayed.
Then, Select "YES" on the screen.
Software Upgrade
Software Upgrade
Software Upgrade
TV Side Panel
USB Drive
50%
Advertisement
