Battery Indicator - Jabra EXTREME2 User Manual

Reject a call*
- press the answer/end button when the phone rings to reject an
incoming call . Depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
will hear a busy signal .
Make a call
- When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset . If your phone does not allow this feature, tap on the
Jabra EXTrEME2's answer/end button to transfer the call to the
headset .
Activate voice dialing*
- press the answer/end button . For best results, record the voice
dialing tag through your headset . please consult user manual
of your phone for more information about using this feature .
Redial last number*
- Double tap the answer/end button when the headset is on and
not used .
Adjust sound and volume*
- Tap the volume up or down to adjust the volume .
Mute/un-mute
- To mute, press both volume up and down at the same time . a
low beep alert plays during a muted call .
- To un-mute, tap either of the volume buttons .
Call waiting and placing a call on hold*
- This lets you put a call on hold during a conversation and
answer a waiting call .
- press the answer/end button once to put the active call on
hold and answer the waiting call .
- press the answer/end button to switch between the two calls .
- Tap the answer/end button to end the active conversation .

Battery indicator

- Tap one of the volume buttons to see the battery level .
* phone dependent
Jabra EXTrEME2
9