Audio And Visual Indicators - Jabra 9125 - Headset Only Flex-boom Nc Mic 1.9GHZ User Manual

Note: If more than 15 seconds elapses without pressing the volume + or volume – buttons, the last
selected interface will be activated.

4. Audio and visual indicators

The GN9120/GN9125's headset and base have audio and visual indicators, which represent various
actions and aspects associated with setting up and operating the product. The headset gives audio and
visual indications. The base gives various visual indications via its online, link and general indicators.
Familiarize yourself with these indicators to fully benefit from your GN9120/GN9125.
The headset's audio indicators:
Headset action
Out of range
Mute ON
Low Battery Charge
Adjusting Volume
Maximum Volume reached
Minimum Volume reached
Tone control adjustment
Adding a headset at conference call
Incoming call
The headset's visual indicators:
Headset mode
Low Power mode
Transmit volume adjustment
The base's visual indicators:
Base's on-line indicator
Charging in Process
Charging completed
Mute
Low Power Mode
Adding a headset to conference call
Link between headset and base
EHS (Electronic Hook Switch) setting
Pairing of Headset and Base
On a call
Audio indication
Beep every 10 sec.
Beep every 15 sec.
Beep every 20 sec.
Low single tone per press
Short beep
Short beep
Beep (indicating 6 sec. has passed)
Beep in master headset
Ringtone (only when using the GN1000, or in the inter-
face modes DHSG and MSH, if they are supported by the
telephone equipment)
Headset indicator
Flashes rapidly when switching
between modes
Flashes rapidly when switching
between modes
On-line indicator
Battery charging indicator flashes
Battery charging indicator ON
Mute indicator ON
Link-up indicator flashes every 10 sec.
All lights are flashing, followed by battery indicator ON
Link-up indicator ON
Please refer to separate section
All lights are flashing for approx.
4 sec., followed by battery indicator
ON
On-line indictor flashes
5