Dell Inspiron 660 Owner's Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Desktop
  5. Inspiron 660
  6. Owner's manual

Dell Inspiron 660 Owner's Manual

Owners manual
Hide thumbs Also See for Inspiron 660:
Table of Contents

Advertisement

Quick Links

Dell Inspiron 660
Owner's Manual
Computer model: Inspiron 660
Regulatory model: D11M
Regulatory type: D11M002

Advertisement

Table of Contents
loading

Related Manuals for Dell Inspiron 660

Summary of Contents for Dell Inspiron 660

  • Page 1 Dell Inspiron 660 Owner’s Manual Computer model: Inspiron 660 Regulatory model: D11M Regulatory type: D11M002...
  • Page 2 © 2012 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell™, the DELL logo, and Inspiron™ are trademarks of Dell Inc.; ® ®...

  • Page 3: Table Of Contents

    Contents Before You Begin ....Turn Off Your Computer and Connected Devices ..Safety Instructions ....Recommended Tools .
  • Page 4 Front Bezel ..... . . Removing the Front Bezel ....Replacing the Front Bezel .
  • Page 5 11 Optical Drive(s) ....Removing the Optical Drive(s) ... . . Replacing the Optical Drives(s) .
  • Page 6 16 Processor ......Removing the Processor ....Replacing the Processor .

  • Page 7: Contents

    21 Flashing the BIOS ....22 Specifications ....Contents...
  • Page 8 Contents...

  • Page 9: Before You Begin

    WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. WARNING: Disconnect all power sources before opening the computer cover or panels. After you finish working inside the computer, replace all covers, panels, and screws before connecting to the power source.

  • Page 10: Recommended Tools

    Recommended Tools The procedures in this document may require the following tools: • Small flat-blade screwdriver • Small Phillips screwdriver • Plastic scribe • Flash BIOS executable update program available at support.dell.com Before You Begin...

  • Page 11: After Working Inside Your Computer

    After Working Inside Your Computer After you complete replacement procedures, ensure the following: • Replace all screws and ensure that no stray screws remain inside your computer • Connect any external devices, cables, cards, and any other part you removed before working on your computer •...
  • Page 12 After Working Inside Your Computer...

  • Page 13: Technical Overview

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Inside View of Your Computer power supply...

  • Page 14: System Board Components

    System Board Components Technical Overview...
  • Page 15 power connector (ATX12V) processor socket processor fan connector (FANCPU) memory-module connector (DIMM1) memory-module connector (DIMM2) main power connector (ATX) Mini-Card slot (MINI1) power button connector (LEDH2) SATA connector (SATA 3) SATA connector (SATA 2) SATA connector (SATA 1) SATA connector (SATA 0) CMOS reset jumper (CMOSCLR1) front panel USB connector (USBF2) front panel USB connector (USBF1)
  • Page 16 Technical Overview...

  • Page 17: Computer Cover

    "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. CAUTION: Ensure that sufficient space exists to support the computer with the cover removed—at least 30 cm (1 ft.) of desk top space.

  • Page 18: Removing The Computer Cover

    Removing the Computer Cover NOTE: Ensure that you remove the padlock from the padlock rings, if applicable. 1 Lay the computer on its side with the computer cover facing up. 2 Using a screwdriver, remove the screws that secure the computer cover to the chassis.

  • Page 19: Replacing The Computer Cover

    Replacing the Computer Cover 1 Connect all the cables and fold the cables out of the way. 2 Ensure that no tools or extra parts are left inside the computer. 3 Align the tabs at the bottom of the computer cover with the slots located along the edge of the chassis.
  • Page 20 Computer Cover...

  • Page 21: Memory Module(S)

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Memory Module(s) Prerequisites Remove the computer cover.

  • Page 22: Replacing The Memory Module(S)

    Dell. If possible, do not pair an original memory module with a new memory module.
  • Page 23 CAUTION: To avoid damage to the memory module, press the memory module straight down into the connector while you apply equal force to each end of the memory module. 3 Insert the memory module into the memory-module connector until the memory module snaps into position and the securing clip locks in place.
  • Page 24 Memory Module(s)

  • Page 25: Front Bezel

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Front Bezel Prerequisites Remove the computer cover.
  • Page 26 Procedure 1 Place the computer in an upright position. 2 Grasp and release the front bezel tabs sequentially, one at a time by moving them outward from the front panel. 3 Rotate and pull the front bezel away from the front of the computer to release the front bezel clamps from the front panel slots.

  • Page 27: Replacing The Front Bezel

    Replacing the Front Bezel Procedure 1 Align and insert the front bezel clamps into the front panel slots. 2 Rotate the front bezel towards the computer until the front bezel tabs snap into place. front bezel front bezel tabs (4) front panel slots (4) front bezel clamps (4) front panel...
  • Page 28 Postrequisites 1 Replace the computer cover. See "Replacing the Computer Cover" on page 19. 2 Follow the instructions in "After Working Inside Your Computer" on page 11. Front Bezel...

  • Page 29: Card Retention Bracket

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Card Retention Bracket Prerequisites Remove the computer cover.
  • Page 30 Procedure Push the release tab to release the card retention bracket from the chassis. release tab card retention bracket Card Retention Bracket...

  • Page 31: Replacing The Card Retention Bracket

    Replacing the Card Retention Bracket Procedure Rotate and push the card retention bracket towards the computer until it snaps into place. Postrequisites 1 Replace the computer cover. See "Removing the Computer Cover" on page 18. 2 Follow the instructions in "After Working Inside Your Computer" on page 11.
  • Page 32 Card Retention Bracket...

  • Page 33: Pci Express Cards

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing PCI Express Cards Prerequisites.
  • Page 34 Procedure 1 Disconnect any cables connected to the card, if applicable. 2 Remove the PCI Express card from the card slot: PCI Express x1 card — Grasp the card by its top corners, and ease it out of its connector. 1 PCI Express x1 card PCI Express x1 card slot PCI Express x16 card —...

  • Page 35: Replacing Pci Express Cards

    3 If you are removing the card permanently, install a filler bracket in the empty card-slot opening. NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer.
  • Page 36 PCI Express x16 card — Push the securing tab to the side and place the PCI Express card in the slot on the system board and press down firmly. Ensure that the PCI Express card is fully seated in the slot. securing tab PCI Express x16 card slot PCI Express x16 card...

  • Page 37: Configuring Your Computer After Removing Or Installing The Pci Express Card

    Configuring Your Computer After Removing or Installing the PCI Express Card NOTE: For information about the location of external connectors, see the Quick Start Guide. For information on installing drivers and software for your card, see the documentation that shipped with the card. Installed Removed Sound card...
  • Page 38 PCI Express Cards...

  • Page 39: Mini-Card

    See "Protecting Against Electrostatic Discharge" in the safety instructions that shipped with your computer. NOTE: Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell. If you ordered a wireless Mini-Card with your computer, the card is already installed.

  • Page 40: Removing The Mini-Card

    Removing the Mini-Card Prerequisites Remove the computer cover. See "Removing the Computer Cover" on page 18. Procedure 1 Disconnect the antenna cable(s) from the Mini-Card. 2 Remove the screw that secures the Mini-Card to the system board. antenna cables (2) screw 3 Lift the Mini-Card away from the system-board connector.

  • Page 41: Replacing The Mini-Card

    Replacing the Mini-Card CAUTION: The connectors are keyed to ensure correct insertion. Use of excessive force may damage the connectors. CAUTION: To avoid damage to the Mini-Card, ensure that there are no cables under the Mini-Card. Procedure 1 Align the notch on the Mini-Card with the tab on the system-board connector.
  • Page 42 Mini-Card...

  • Page 43: Hard Drive(S)

    "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. WARNING: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.
  • Page 44 Procedure 1 If you are removing the primary hard-drive, disconnect the power and data cables from the primary hard-drive. 2 If you are removing the secondary hard-drive: Disconnect the power cable from the primary and secondary hard-drives. Disconnect the data cable from the secondary hard-drive. NOTE: If you are not replacing the hard drive at this time, disconnect the other end of the data cable from the system board connector and set it aside.

  • Page 45: Primary Hard-Drive

    Primary Hard-Drive primary hard-drive assembly data cable power cable screws (2) Hard Drive(s)

  • Page 46: Secondary Hard-Drive

    Secondary Hard-Drive secondary hard-drive assembly data cable power cable screws (2) Hard Drive(s)
  • Page 47 5 Remove the screws (one on each side) that secure the hard-drive brackets to the hard-drive. 6 Remove the hard-drive brackets off the hard drive. hard drive screws (2) hard-drive bracket 7 If removing the hard drive changes the drive configuration, ensure that you reflect these changes in system setup.

  • Page 48: Replacing The Hard Drive(S)

    Replacing the Hard Drive(s) Procedure 1 Check the documentation that shipped with the hard drive to verify that it is configured for your computer. 2 Place the hard-drive brackets in position and replace the screws (one on each side) that secure the hard-drive brackets to the hard drive. 3 Slide the hard-drive assembly into the hard-drive bay.

  • Page 49: Optical Drive(S)

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Optical Drive(s) Prerequisites 1 Remove the computer cover.
  • Page 50 Procedure 1 If you are removing the primary optical-drive, disconnect the power and data cables from the primary optical-drive. 2 If you are removing the secondary optical-drive: Disconnect the power cable from the primary and secondary optical-drives. Disconnect the data cable from the secondary optical-drive. NOTE: If you are not replacing the optical drive at this time, disconnect the other end of the data cable from the system board connector and set it aside.

  • Page 51: Primary Optical-Drive

    Primary Optical-Drive power cable data cable primary optical-drive screws (2) Optical Drive...

  • Page 52: Secondary Optical-Drive

    Secondary Optical-Drive power cable data cable secondary optical-drive screws (2) 5 Set aside the optical drive in a secure location. Optical Drive...

  • Page 53: Replacing The Optical Drives(S)

    Replacing the Optical Drives(s) Procedure 1 Remove the screw from the optical drive you removed and insert it in the new optical drive. screw Optical Drive...
  • Page 54 2 To install a secondary optical drive, pull the break-away metal plate off the chassis. break-away metal plate 3 Gently slide the optical drive into the optical drive bay through the front of the computer. 4 Align the screw holes on the optical drive with the screw holes on the chassis.
  • Page 55 6 If you are replacing the primary optical-drive, connect the power and data cables to the primary optical-drive. 7 If you are replacing the secondary optical-drive: Connect the power cable to the primary and secondary optical-drives. Connect the data cable to the secondary optical-drive. Postrequisites 1 Replace the computer cover.
  • Page 56 Optical Drive...

  • Page 57: Front I/O Panel

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Front I/O Panel Prerequisites 1 Remove the computer cover.
  • Page 58 Procedure NOTE: Make note of the routing of all cables as you remove them so that you can re-route them correctly when installing the new front I/O panel. 1 Disconnect the front I/O panel cables from the system board connectors (AUDIOF1, USBF1, and USBF2).

  • Page 59: Replacing The Front I/O Panel

    Replacing the Front I/O Panel Procedure CAUTION: To avoid damage to the cable connectors and the cable routing clips, carefully slide the front I/O panel into the front I/O panel clamp slot. 1 Align and slide the front I/O panel clamps into the slots on the front panel. 2 Replace the screws that secure the front I/O panel to the front panel.
  • Page 60 Front I/O Panel...

  • Page 61: Power Button Module

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Power Button Module Prerequisites 1 Remove the computer cover.
  • Page 62 Procedure 1 Disconnect the power button module cable from the system board connector (LEDH2). See "System Board Components" on page 14. 2 Press the power button module tabs and pull the power button module to release it from the front panel. power button module power button module tabs (4) 3 Set aside the power button module in a secure location.

  • Page 63: Replacing The Power Button Module

    Replacing the Power Button Module Procedure 1 Align and push the power button module tabs into the slots on the front panel. 2 Connect the power button module cable to the system board connector (LEDH2). See "System Board Components" on page 14. Postrequisites 1 Replace the front bezel.
  • Page 64 Power Button Module...

  • Page 65: Chassis Fan

    Before working working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Chassis Fan Prerequisites Remove the computer cover.
  • Page 66 Procedure 1 Disconnect the chassis fan cable from the system board connector (FANSYS4). See "System Board Components" on page 14. 2 Remove the screws that secure the chassis fan to the chassis. 3 Slide and lift the chassis fan away from the computer as shown in the illustration.

  • Page 67: Replacing The Chassis Fan

    Replacing the Chassis Fan Procedure 1 Align the screw holes on the chassis fan with the screw holes on the chassis. 2 Replace the screws that secure the chassis fan to the chassis. 3 Connect the chassis fan cable to the system board connector (FANSYS4). See "System Board Components"...
  • Page 68 Chassis Fan...

  • Page 69: Processor Fan And Heat-Sink Assembly

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Processor Fan and Heat-Sink Assembly Prerequisites Remove the computer cover.
  • Page 70 Procedure WARNING: Despite having a plastic shield, the processor fan and heat-sink assembly may be very hot during normal operation. Ensure that it has had sufficient time to cool before you touch it. CAUTION: The processor fan and heat-sink assembly is a single unit. Do not try to remove the fan separately.

  • Page 71: Replacing The Processor Fan And Heat-Sink Assembly

    Replacing the Processor Fan and Heat-Sink Assembly Procedure CAUTION: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a requirement for optimal processor operation CAUTION: Incorrect alignment of the processor fan and heat-sink assembly can damage the system board and processor NOTE: The original thermal grease can be reused if the original processor and...
  • Page 72 Processor Fan and Heat-Sink Assembly...

  • Page 73: Processor

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Processor Prerequisites 1 Remove the computer cover.
  • Page 74 Procedure 1 Press down and push the release lever away from the processor to release it from the securing tab. 2 Extend the release lever completely to open the processor cover. processor cover release lever CAUTION: When removing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket.

  • Page 75: Replacing The Processor

    Replacing the Processor Procedure 1 Unpack the new processor, being careful not to touch the underside of the processor. CAUTION: You must position the processor correctly in the processor socket to avoid damage to the processor. 2 If the release lever on the socket is not fully extended, move it to that position.
  • Page 76 CAUTION: Ensure that the processor cover notch is positioned underneath the alignment post. 5 When the processor is fully seated in the socket, close the processor cover. 6 Pivot the release lever down and place it under the tab on the processor cover.

  • Page 77: Coin-Cell Battery

    "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. WARNING: A battery may explode if installed incorrectly. Replace the battery only with the same or equivalent type.
  • Page 78 Procedure 1 Locate the battery socket. See "System Board Components" on page 14. 2 Press the battery-release lever away from the battery until the coin-cell battery pops up. battery-release lever coin-cell battery battery socket 3 Set aside the battery in a secure location. Coin-Cell Battery...

  • Page 79: Replacing The Coin-Cell Battery

    Replacing the Coin-Cell Battery Procedure Insert the battery (CR2032) into the socket with the side labeled "+" facing up, and press down the battery in the socket. coin-cell battery battery socket Postrequisites 1 Replace the computer cover. See "Replacing the Computer Cover" on page 19.
  • Page 80 Coin-Cell Battery...

  • Page 81: Power Supply

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Power Supply Prerequisites Remove the computer cover.
  • Page 82 Procedure 1 Disconnect the DC power cables from the system board and the drives. See "System Board Components" on page 14. 2 Remove the screws that secure the power supply to the chassis. 3 Press the power supply clamp to release the power supply from the chassis. 4 Slide and lift the power supply away from the chassis.

  • Page 83: Replacing The Power Supply

    Replacing the Power Supply Procedure 1 Slide the power supply towards the back of the chassis. 2 Align the screw holes on the power supply with the screw holes on the chassis. 3 Replace the screws that secure the power supply to the chassis. 4 Connect the DC power cables to the system board and drives.
  • Page 84 Power Supply...

  • Page 85: System Board

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the System Board Prerequisites 1 Remove the computer cover.
  • Page 86 Procedure 1 Disconnect all cables connected to the system board. See "System Board Components" on page 14. Note the routing of all cables as you remove them so that you can re-route them correctly after installing the new system board. 2 Remove the screws that secure the system board to the chassis.

  • Page 87: Replacing The System Board

    4 Compare the system board that you removed with the replacement system board to ensure that they are identical. NOTE: Some components and connectors on the replacement system board may be in different locations compared to the components and connectors on the existing system board.

  • Page 88: Entering The Service Tag In The Bios

    Entering the Service Tag in the BIOS 1 Turn on the computer. 2 Press <F2> during POST to enter the system setup program. 3 Navigate to the main tab and enter the Service Tag in the Service Tag Input field. NOTE: The Service Tag Input field allows you to enter the Service Tag manually only when the Service Tag is absent.
  • Page 89 System Board...
  • Page 90 System Board...

  • Page 91: System Setup

    Entering System Setup 1 Turn on (or restart) your computer. 2 During POST, when the DELL logo is displayed, watch for the F2 prompt to appear and then press <F2> immediately. NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so you must watch for it, and then press <F2>.
  • Page 92 System Setup Screens The system setup screen displays current or changeable configuration information for your computer. Information on the screen is divided into three areas: the setup item, active help screen, and key functions. Setup Item — This field appears Help Screen —...
  • Page 93 System Setup Options NOTE: Depending on your computer and installed devices, the items listed in this section may appear, or may not appear exactly as listed. Main — System Information Displays the BIOS Revision number BIOS Revision Displays the build date in mm/dd/yyyy BIOS Build Date format Displays system name...
  • Page 94 Main — SATA Information SATA 1 Displays the type of device installed on Device Type the SATA1 connector Displays the serial number of the Device ID device installed Displays the size of the device installed, if Device Size the device is a hard drive SATA 2 Displays the type of device installed on Device Type...
  • Page 95 Advanced — CPU Feature Allows you to enable or disable the Intel Intel Hyper-Threading Hyper-Threading feature for the processor Technology Enabled or Disabled (Enabled by default) Intel(R) SpeedStep Technology Allows you to enable or disable the Intel SpeedStep feature for the processor Enabled or Disabled (Enabled by default) Allows you to enable or disable the Intel(R) Virtualization...
  • Page 96 Advanced — USB Configuration Allows you to enable or disable the front USB ports Front USB Ports on your computer Enabled or Disabled (Enabled by default) Allows you to enable or disable the rear USB ports Rear USB Ports on your computer Enabled or Disabled (Enabled by default) Advanced —...
  • Page 97 Boot (continued) Allows you to enable or disable booting from USB USB Boot Support mass storage devices such as hard drive, optical drive, USB key, and so on. Enabled or Disabled (Disabled by default) Specifies the boot sequence from the Boot Mode available devices Displays the first boot device...
  • Page 98 Power (continued) Allows you to set the date on which the computer Auto Power On Date must turn on automatically; This option can be configured only if the Auto Power On mode is set to Enabled 1 to 31 (15 by default) Allows you to set the time at which the computer Auto Power On Time must turn on automatically;...
  • Page 99 Exit Save Changes and Reset Allows you to save changes and exit system setup Allows you to discard changes and exit system setup Discard Changes and Reset Allows you to restore the default settings Load Default System Setup...
  • Page 100 Boot Sequence This feature allows you to change the boot sequence for devices. Boot Options • USB Floppy — The computer attempts to boot from the USB floppy drive. If no operating system is on the floppy disk, the computer generates an error message.

  • Page 101: Changing Boot Sequence

    Changing Boot Sequence for the Current Boot You can use this feature to change the current boot sequence, for example, to boot from the CD/DVD/CD-RW drive to run Dell Diagnostics from the Drivers and Utilities disc. On completion of the diagnostic tests, the previous boot sequence is restored.

  • Page 102: Clearing Forgotten Passwords

    CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  • Page 103 5 Turn on the computer to clear the password. 6 Turn off the computer and disconnect your computer and all attached devices from their electrical outlets. 7 Remove the 2-pin jumper plug from pins 1 and 2 and replace it on pins 2 and 3 to enable the password feature.

  • Page 104: Clearing Cmos Passwords

    CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  • Page 105 5 Wait for approximately five seconds to clear the CMOS setting. 6 Remove the 2-pin jumper plug from pins 1 and 2 and replace it on pins 2 and 3. 7 Replace the computer cover. See "Replacing the Computer Cover" on page 19.
  • Page 106 System Setup...

  • Page 107: Flashing The Bios

    • Choose from My Products and Services List • Choose from a list of all Dell products Click Continue and follow the instructions on the screen. 4 A list of results appears on the screen. Click BIOS. 5 Click Download File to download the latest BIOS file.
  • Page 108 Flashing the BIOS...

  • Page 109: Specifications

    Specifications To learn about the features and advanced options available on your computer, see Specifications at support.dell.com/manuals Specifications...
  • Page 110 Specifications...

Table of Contents