Table of Contents
Advertisement
Quick Links
DT-R24L41D
DT-R17L4D
MULTI FORMAT LCD MONITOR
For Customer Use:
Enter below the Serial No. which is
located on the rear of the cabinet. Retain
this information for future reference.
Model No.
: DT-R24L41D / DT-R17L4D
Serial No.
:
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock. Do
not remove cover (or back). No user
serviceable parts inside. Refer servicing
to qualified service personnel.
The illustration of the monitor is of DT-R24L41D.
INSTRUCTIONS
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated "dangerous voltage"
within the product's enclosure that may
be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
LCT2646-002A-H
Advertisement
Table of Contents
Related Manuals for JVC DT-R24L41DU
Summary of Contents for JVC DT-R24L41DU
- Page 1 The lightning flash with arrowhead symbol, within an equilateral triangle is CAUTION intended to alert the user to the presence of uninsulated “dangerous voltage” RISK OF ELECTRICAL SHOCK within the product’s enclosure that may DO NOT OPEN be of sufficient magnitude to constitute a risk of electric shock to persons.
-
Page 2: Table Of Contents
Table of Contents Safety Precautions IMPORTANT SAFEGUARDS ................3 Operating Precautions Caution for use of the product for many hours............5 Caution for use of the product in the high temperature ........5 Maintenance ......................5 Installation Connections Rear panel ......................8 Daily Operations Front panel ...................... -
Page 3: Safety Precautions
Safety Precautions WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, Under the following conditions, DO NOT EXPOSE THIS APPARATUS TO RAIN OR 1. Turn off the power. MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH 2. Unplug this product from the wall outlet. AS VASES, SHALL BE PLACED ON THE APPARATUS. -
Page 4: Important Safety Instructions
FCC NOTICE CAUTION: Changes or modifi cations not approved by JVC could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. -
Page 5: Operating Precautions
Operating Precautions The LCD panel and backlight have life expectancy. Due to the basic characteristics of the LCD panel, an afterimage or uneven display may occur. It is recommended that you change images occasionally, activate the power saving function, or often turn off the power to reduce the load on the LCD panel. -
Page 6: Installation
Installation CAUTION • Do not rest your arm on the monitor or lean against the monitor. • Do not touch the LCD panel when installing the monitor. • Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury. To install the monitor on a shelf or any other Adjust the position so that the screw holes on the stand support align with right and left screw holes “C”... - Page 7 To install the monitor on a wall Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged. Loosen the stand You can install the monitor on a wall by changing how the stand screws on the stand support and remove the bottom plate.
-
Page 8: Connections
Connections Rear panel DT-R24L41D DT-R17L4D The illustration of the monitor is of DT-R24L41D. DT-R24L41D DT-R17L4D Security slot Attach a security wire to this slot. 1 POWER switch Turns AC power on or off. • You need to press button (☞ t on page 10) to use the monitor after turning on the POWER switch. 2 AC IN terminal AC power input connector. -
Page 9: Attaching The Power Cord Holder
6 For DT-R24L41D: AUDIO ASSIGN (MONITOR OUT) terminals (pin jack) / For DT-R17L4D: AUDIO (MONITOR OUT) terminals (pin jack) Output terminals for the analog audio signal. • For DT-R24L41D: The terminals output the audio signal through AUDIO ASSIGN (IN 1 or IN 2) terminals when you select the video input you have selected for “AUDIO1 ASSIGN.”... -
Page 10: Daily Operations
Daily Operations Front panel Tally lamp This lamp is controlled by the tally function of the MAKE/TRIGGER terminal. • You can select the color of the tally lamp from “GREEN” or “RED.” (☞ “TALLY SELECT” in “FUNCTION SETTING” on page 15 and “External Control”... - Page 11 Audio Channel Selection Select audio channels emitted from the speakers (L/R) and the Press buttons to select the left (L ch) or AUDIO ASSIGN (DT-R24L41D) / AUDIO (DT-R17L4D) (MONITOR right (R ch). OUT) (OUT1(L)/OUT2(R)) terminals, when EMBEDDED AUDIO signals come in to the E. AUDIO HD/SD SDI terminal (IN1 or IN2) Press buttons to select an audio channel.
-
Page 12: Menu Configuration
Menu Confi guration The operation procedure MAIN MENU SET-UP MENU Display the menu. Selected To display the MAIN MENU item Press MENU button. To display the SET-UP MENU Press button while holding button. Operation guide Press buttons to select an item, then press button. -
Page 13: Main Menu
MAIN MENU PICTURE FUNCTION Setting for the picture quality Item To do Setting value APERTURE Activates/deactivates the function at the level set in “APERTURE LEVEL.” OFF, ON APERTURE LEVEL Compensate the frequency response of the luminance signal of the video signal. 01 – 10 Adjust the clearness of the outlines of the chrominance signal. -
Page 14: Audio Setting
Menu Confi guration (cont.) MARKER *1*2 Settings for marker functions Item To do Setting value R-AREA MARKER Activate/deactivate the area marker and select the style of it. OFF, LINE, HALF, HALF+L, BLK. , BLK.+L R-MARKER ASPECT Select the aspect ratio of the area marker. 4:3, 14:9, 13:9, 2.35:1, 1.85:1, 1.66:1 R-SAFETY MARKER... -
Page 15: Set-Up Menu
SYNC FUNCTION Settings for the synchronization with signals Item To do Setting value NO SYNC ACTION Select the screen status when no signal is coming in. OFF, P.SAVE, GRAY B. P.SAVE: power save mode GRAY B.: gray screen DELAY TIME Select the period until the screen status changes as selected in “NO SYNC 30sec., 5min., 15min. - Page 16 Menu Confi guration (cont.) SIZE/POSI. ADJ. Adjusts the size and position of the picture. Item To do Setting value H SIZE Adjust the horizontal picture size. Setting value varies depending on the signals. H POSITION Adjust the horizontal picture position. V SIZE Adjust the vertical picture size.
- Page 17 INFORMATION Settings for the information display of the monitor Item To do Setting value POSITION UPPER, LOWER Select the position to show the information display (☞ “On the Information Display” on page 11). SOURCE ID Select whether the name assigned in “CHARACTER SET.” is displayed on the OFF, ON, AUTO screen (☞...
-
Page 18: External Control
External Control About the external control Using the MAKE/TRIGGER system This monitor has three external control terminals. The MAKE/TRIGGER terminal is confi gured as follows. You can assign a function to each pin terminal in “REMOTE SETTING” (☞ “PIN1, PIN2, •... - Page 19 <Functions controlled by the MAKE/TRIGGER system> Display Functions to be controlled Opening Short-circuiting TALLY SEL Selects the color of the tally lamp. Green SDI 1 Changes the input to “SDI 1.” Invalid Valid SDI 2 Changes the input to “SDI 2.” Invalid Valid Changes the input to “DVI.”...
-
Page 20: Using The Serial Communication
External Control (cont.) Using the serial communication You can control the monitor from a personal computer etc. via the RS-485 or RS-232C terminal. • Consult your dealer for the details of the external control specifi cation. <Communication specifi cations> Terminal Input terminal Cable Communication specifi... - Page 21 <Basic command list> Commands Functions Data Starts communication (connection) No data Terminates communication (termination) No data Assigns the control ID 01 – 99 Initializes the control ID No data Displays/hides the ID 00: Hide, 01: Display Flashes/hides the selected ID No. of the monitor 00: Hide, 01: Display Displays the MAIN MENU/Quits the menu operation No data No data...
-
Page 22: Troubleshooting
Troubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action Page •... -
Page 23: Self-Check Program
Self-check program This monitor has a self-check function, which allows it to detect malfunctions and alert you. This makes troubleshooting easier. Whenever a problem occurs, one or some of the INPUT SELECT lamps will fl ash. If this happens, follow the steps below and contact your dealer to resolve the problem. -
Page 24: Specifications
Specifi cations General Model name DT-R24L41D DT-R17L4D Type Multi format LCD monitor Screen size Type 24 wide format Type 17 wide format Aspect ratio 16:10 16:9 Horizontal/vertical frequency H: 31.469 kHz – 75.000 kHz (computer signal) V: 48 Hz – 65 Hz * Some signals within this frequency range may not be displayed (“Out of range”... -
Page 25: Dimensions
Dimensions Unit: mm (inch) DT-R24L41D <Front view> <Side view> <Rear view> VESA mounting holes 99 (4) (Size: M4, depth: 10 mm) 51.9 (2 1/8) 564 (22 1/4) 1.5 (1/8) 21 (7/8) 181(7 1/4) 300 (11 7/8) To install the monitor on a shelf To install the monitor on a wall <Top view>... -
Page 26: Available Signals
Specifi cations (cont.) Available signals The following signals are available for this monitor. Video signals Input terminal Signal format shown in DVI-D (HDCP) Signal name the status display VIDEO E. AUDIO HD/SD SDI (Digital component (☞ page 11) (INPUT1, INPUT2) (IN 1, IN 2)* /Digital RGB) NTSC... - Page 27 Notice on transportation This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers. • For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different from actual products.
- Page 28 © 2011 Victor Company of Japan, Limited 0111TMH-MW-MT...