Selecting A Supported Display Mode - Lenovo 2120-HB1 User Manual

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-
attach the CRT monitor temporarily until you have re-configured the system;
preferably to 1600x900 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Addressability
640 350
640 480
700 570
720 400
800 600
832 624
1024 768
1366 768
1152 864
1
1280 768
1280 800
1280 1024
1440 900
1600 900
x
x
x
x
x
x
x
x
x
x
7
x
x
x
x
x
Refresh rate
70H
60Hz 72Hz 75Hz
50Hz
70Hz
56Hz 60Hz 72Hz 75Hz
75Hz
60Hz 70Hz 75Hz
60Hz 75Hz
75Hz
60Hz
60Hz
60Hz
60Hz 70Hz 75Hz
60Hz
60Hz 75Hz
Chapter 2.
2-7