Setting The Optimal Resolution; Adjusting The Volume - HP v216w - 21 Inch Wide LCD Monitor User Manual

Settings

Setting the Optimal Resolution

The recommended resolution for this monitor is 1680 x 1050. To configure the monitor to this resolution,
complete the setup procedure and make sure that the monitor is connected to the computer. Turn the monitor
on and do the following:
1 Click the Windows Start Button
2 Under Appearance and Personalization, click Adjust Screen Resolution.
3 Set the resolution slide bar to 1680 x 1050.
NOTE: If 1680 x 1050 is not shown, download the monitor driver from the Web. See
instructions.

Adjusting the Volume

While the monitor is turned on but the OSD menu is inactive, press the volume increase and decrease (plus
and minus) buttons to adjust volume to the desired level. Volume can range from 0 (mute) to 100. The preset
value is 50.
Locking and Unlocking the OSD
To change the lock status of the on-screen display (from locked to unlocked, or from unlocked to locked) press
and hold the Menu button for 10 seconds while the monitor is on. If the OSD is locked, the message "OSD
Lock" displays for 10 seconds.
®
, and then click Control Panel.
Using the Monitor for
13