Insignia NS-DPF1110W Quick Setup Manual

Congratulations on your purchase of a high-
quality Insignia product. Your new digital picture
frame is designed for reliable and trouble-free
performance.
Package contents
• Digital picture frame
• AC power adapter
• USB cable
• Remote control with battery (CR2025)
• User Guide
• Quick Setup Guide
Features
• Adjustable stand
• Displays digital pictures (JPEG format) and
picture slideshows without a computer
• Displays pictures directly from an inserted
memory card or USB device (not included)
• Bright, clear TFT LCD screen
• Compatible with a wide variety of memory
cards, including SD, SDHC™, MMC™, Memory
Stick®, Memory Stick Pro Duo™ (requires
an adapter - not included), xD™, microSD™
(requires an adapter - not included)
• Compatible with USB fl ash drives
• Mini-USB connector to connect the digital
picture frame to your computer
• Multi-image mode displays multiple pictures at
the same time in a slideshow
• Auto Rotate–pictures are rotated based on EXIF
data
• On-frame button controls and infrared remote
control
• 128 MB internal memory
NS-DPF1110W_10-0586_QSG_V1_EN.indd 1 NS-DPF1110W_10-0586_QSG_V1_EN.indd 1
V1
FINAL
FOR PRINT
Quick Setup Guide l
Sides
# Description
1 Memory card slot (SD/SDHC/MMC/Memory
Stick/Memory Stick Pro Duo/xD/microSD)
2 USB (type A) port
3 Mini USB port
4 DC 5 V power connector. Plug the AC power
adapter in here.
Back
# Description
1 Back button—go back to the previous
selection or screen
2 Down arrow—press to navigate down
Up arrow—press to navigate up
3 Enter/Play/Pause - press to select menu items.
During a slideshow, press to pause or resume
4 Left arrow—press to move the menu selection
left or to display the previous picture
Right arrow—press to move the menu
selection right or to display the next picture
NS-DPF118S / NS-DPF1110W 8"/10" Digital Picture Frame
5 Menu / Standby—press to open the Setup
menu;
Press and hold down for 2 seconds to put the
frame into Sleep mode
Pressing any button on the frame or remote
will wake up the frame
6 Power On/Off switch
7 Keyed slot for the stand
Setting up the remote control
• Remove the plastic tab that extends past the
bottom edge of the remote control. This tab
protects the battery. The remote control will
not work until it is removed.
Setting up the frame
1 Insert the key on the back of the stand into the
keyed slot on the back of the digital picture
frame, then turn it counterclockwise 1/4 turn to
lock it into place.
2 Turn the stand counterclockwise 90° to set the
frame in portrait orientation.
Stand
3 Plug the AC power adapter into the frame's DC
power connector and into an AC power outlet.
4 Place the frame on a fl at surface, then pull out
the lower part of the stand to adjust the frame's
viewing angle.
Slide the power switch to the On position. The
frame turns on and automatically starts playing
a slideshow of the pictures stored in internal
memory. This slideshow is called Demo mode.
To turn off Demo mode, point the remote
control at the front of the frame and press any
button.
Viewing pictures on a memory card or
USB device
• Insert a memory card or USB device into the
available memory slot or the USB port. A
slideshow of pictures from the memory card or
USB device automatically starts to play.
Caution: Memory cards fi t into the card slots in
one direction only. Do not force a memory card
into a slot. The card should fi t snugly when inserted
correctly. Some cards require an adapter to fi t
correctly. For more information on supported
memory cards, see "Specifi cations" in the User Guide.
For more information about using your digital picture
frame, see your User Guide.
Six-month limited warranty
See the User Guide or visit
www.insigniaproducts.com for details.
© 2010 BBY Solutions, Inc. All rights reserved. INSIGNIA is a
trademark of BBY Solutions, Inc. Registered in some countries.
All other products and brand names are trademarks of their
respective owners.
ENGLISH 10-0586
7/12/2010 4:10:46 PM 7/12/2010 4:10:46 PM