EAW DX810 Instruction Manual page 31

AUDIO
Noise
(20 Hz-20 kHz bandwidth, Master Out, channel Trims @ unity gain,
channel EQs flat, all odd channels panned left, even channels
panned right):
Master level @ unity, channel levels @ unity:
Single channel to Master Out:
Total Harmonic Distortion (THD+N)
(1 kHz @ +10 dBu (unity level) 20 Hz-20 kHz):
Mic in to Master Out:
Crosstalk
(1 kHz relative to 0 dBu, 20 Hz-20 kHz bandwidth, any line input to
adjacent Direct Out):
Trim to unity:
Frequency Response
Mic input to any output:
Equivalent Input Noise (EIN)
Mic in to Direct out, max gain, 150 ohm termination:
Common Mode Rejection (CMR)
Mic in to Direct out, max gain, 1 kHz signal: better than 80 dB
Maximum and Nominal Levels and Ranges
Mic inputs:
Line inputs:
Bus A/B inputs:
All outputs:
–82 dBu
–100 dBu
(referenced to 1% THD+N)
< 0.005%
< –90 dB
20 Hz–20 kHz, ±0.5 dB
–129.5 dBm unweighted
+18 dBu, +4 dBu,
0 to 60 dB gain
+18 dBu, +4 dBu,
–30 to +30 dB gain
+18 dBu, +4 dBu,
–20 to +20 dB gain
+18 dBu, +4 dBu
Impedances
Mic inputs:
Line inputs:
All other inputs:
All outputs:
PHYSICAL
Dimensions (HxWxD): 3.5"/2 RU (89mm) x 19" (483mm) x
13.25" (337mm)
Net Weight: 12.9 lbs. (5.9 kg)
ELECTRICAL
AC Power: 90–240 VAC, 50/60 Hz, 1.0 A
DC Power: 24 VDC, 3 A
Phantom Power: +48 VDC, current limited to 7 mA
per input channel
Fuse Ratings: 1.6 A Slo Blo, 250 V
PC SYSTEM REQUIREMENTS
OS: Windows® 95, 98, NT®, 2000, XP
Processor: Pentium® or faster
RAM: 16 MB minimum
32 MB recommended
Storage: 10 MB free disk space
Display: 800x600 pixels, 256 colors minimum
DX810
1.3K ohms
40K ohms
10K ohms or greater
120 ohms
DX810 DIGITAL MIXER
31
DX810 –