Page 1
Version simplifiée Simple Versión sencilla version Version basique Basic Versión básica version AV SURROUND RECEIVER Version avancée AVR-991 Advanced Versión avanzada version Owner’s Manual Manuel de l’Utilisateur Manual del usuario “Part names and functions” Information (vpage 94) Informations “Nomenclature et fonctions“...
The exclamation point within an equilateral triangle is intended approved by DENON may void your authority, granted by the FCC, to use 10. Protect the power cord from being walked on or pinched particularly at to alert the user to the presence of important operating the product.
ENGLISH FRANCAIS ESPAÑOL n CAUTIONS ON INSTALLATION NOTES ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO PRÉCAUTIONS D’INSTALLATION WARNINGS AVERTISSEMENTS ADVERTENCIAS EMPLAZAMIENTO DE LA INSTALACIÓN • Avoid high temperatures. • Eviter des températures élevées. • Evite altas temperaturas. Allow for sufficient heat dispersion when Tenir compte d’une dispersion de chaleur Permite la suficiente dispersión del calor cuando...
ENGLISH Getting started Thank you for purchasing this DENON product. To ensure proper operation, please read these owner’s manual carefully before using the Accessories product. After reading them, be sure to keep them for future reference. Check that the following parts are supplied with the product.
ENGLISH Features Cautions on handling • Before turning the power switch on Fully Discrete, identical quality and power for all Audyssey DSX™ Check once again that all connections are correct and that there are 7 channels (165 W x 7ch) This unit is equipped with an Audyssey DSX decoder.
ENGLISH Simple version (Simple setup guide) Simple version Here, we explain the entire setup procedure, from unboxing the unit to using it in a home theater. The “Simple version” describes the installation, connection and setup methods for 5.1-channel speakers. See page 47 for the installation, connection and setup methods for speakers other than 5.1-channel speakers. n Before connecting the unit, turn off the power to all devices.
ENGLISH Install Connect This unit can perform 2.0/2.1 to 7.1-channel surround playback. NOTE Speakers • Connect so that the speaker cable core wires Here, we explain setup using the example of 5.1-channel speaker do not protrude from the speaker terminal. playback.
ENGLISH Connect Blu-ray Disc player and TV Use only an HDMI (High Definition Multimedia Interface) cable that bears the HDMI logo (a genuine HDMI product). Using a cable without the HDMI logo (a non-genuine HDMI product) may result in abnormal playback. When outputting Deep Color or 1080p, etc., we recommend you use a “High Speed HDMI cable”...
ENGLISH Turn on power Set up speakers (Audyssey ® Auto Setup) Turn on the TV and subwoofer power. The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey Auto Setup”.
ENGLISH Set up speakers (Audyssey ® Auto Setup) About setup microphone placement Prepare the setup microphone Set up the remote control unit Mount the setup microphone on a tripod or stand n Set up the zone mode • Measurements are performed by placing the setup microphone and place it in the main listening position.
Page 11
ENGLISH Set up speakers (Audyssey ® Auto Setup) STEP 1 STEP 2 STEP 3 Preparation Speaker Detection Measurement • In STEP 2, you will perform measurements at the • In STEP 3, you will perform measurements at NOTE Connect the setup microphone to the main listening position.
Page 12
ENGLISH Set up speakers (Audyssey ® Auto Setup) STEP 4 STEP 5 STEP 6 Finish Calculation Check Store Unplug the setup microphone from ENTER to select the item you want Select “Store” and then press On the screen, use STEP3 the unit’s SETUP MIC jack.
ENGLISH Error messages Parameter Check An error message is displayed if Audyssey ® Auto Setup could not be completed due to speaker placement, the measurement environment, etc. This function enables you to check the measurement results and If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey Auto Setup over again. equalizer characteristics after Audyssey Auto Setup.
Page 14
ENGLISH Play back disc When power is switched to standby Press to switch an input source POWER OFF Press for a player used for playback. GPower indicator status in standby modeH Play the component connected to • Normal standby : Off this unit.
ENGLISH Basic version Basic version Here, we explain the connections and basic operation methods for this unit. F Connections vpage 13 F Playback (Basic operation) vpage 23 F Selecting a listening mode (Surround mode) vpage 43 n Refer to the pages indicated below for information on connecting and playing back the various media and external devices.
ENGLISH Connections GFlow of video signals for ZONE2H Important information This unit Monitor • Make connections as follows before using this unit. Select an appropriate connection type Video device according to the components to be connected. • You may need to make some settings on this unit depending on the connection method. Refer to each description for more information.
ENGLISH About HDMI cables Important information Examples of screen display • When a device supporting Deep Color signal transfer is connected, use a cable compatible “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. • Menu screen • Status display screen •...
Page 18
ENGLISH Connecting an HDMI-compatible device Cables used for connections Connecting to a device equipped with a DVI-D connector When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to Audio and video cable (sold separately) DVI signals, allowing connection to a device equipped with a DVI-D connector.
ENGLISH Connecting a TV Connecting a Blu-ray Disc player • Select the connector to use and connect the device. • You can enjoy video and audio from a Blu-ray Disc. • For video connections, see “Converting input video signals for output (Video conversion function)” •...
ENGLISH Connecting a DVD player Connecting a set-top box (Satellite tuner/cable TV) • You can enjoy video and audio from a DVD. • You can watch satellite or cable TV. • Select the connector to use and connect the device. •...
ENGLISH Connecting a digital video recorder Connecting a digital camcorder • You can record video onto a Blu-ray Disc or DVD. • You can enjoy video and audio from a digital camcorder. • Select the connector to use and connect the device. •...
DENON control dock for iPod. • When you want to playback a video file stored on an iPod, use a DENON control dock for iPod (ASD-1R and ASD-11R, sold separately) (vpage 19 “Connecting a control dock for iPod”). • With iPods, playback is possible with iPhone, iPod touch, classic and nano released from the 5th-generation of iPods.
ENGLISH Connecting an antenna Connecting an FM/AM receiver in Set as Necessary Connecting a SIRIUS connector When connecting digital of the SiriusConnect Home Tuner, • Connect the FM antenna or AM loop antenna included with the unit • This unit is a SIRIUS Satellite Radio Ready ® receiver. You can perform the setting “Digital”.
ENGLISH Connecting an antenna Connecting a record player Connecting a CD player n AM loop antenna assembly You can enjoy playing records. • You can enjoy CD sound. Put the stand section • Select the connector to use and connect the device. Stand Cables used for connections through the bottom of the...
• The types of routers that can be used depend on the ISP. Contact an • You can update by downloading the latest firmware from the Device that connects to the broadband circuit and conducts ISP or a computer shop for details. DENON website. communications on the Internet. • DENON assumes...
ENGLISH Playback (Basic operation) Selecting the input source n Selecting the input source (vpage 23) • When using with an iPod connected directly to the USB port of this Press the input source select button n Adjusting the master volume (vpage 23) unit, select “...
Connect the DENON control dock for iPod to this unit Remote (vpage 19 “Connecting a control dock for iPod”). control unit Active Set the iPod ® in the DENON control dock for iPod. (This unit) buttons iPod ® Press POWER ON to turn on power to the unit.
Page 28
Operation buttons Function file to be played. When an iPod equipped with a video function is connected to a DENON ASD-11R control dock for iPod, image files can be played MENU Amp menu Press ENTER in the Browse mode.
Page 29
• Depending on the type of iPod and the software version, some functions may not operate. • Note that DENON will accept no responsibility whatsoever for any problems arising with the data on an iPod when using this unit in...
ENGLISH Playing an iPod ® Tuning in radio stations iPod play function n SIRIUS XM radio legal Important information iPod PLAY is pressed when power of this unit is on standby and a SIRIUS, XM and all related marks and logos are trademarks of Sirius control dock for iPod or an iPod (USB) is connected, the iPod starts XM Radio Inc.
Page 31
ENGLISH Tuning in radio stations n Presetting radio channels (Preset memory) n Checking the SIRIUS signal strength and radio n Searching categories Your favorite broadcast channels can be preset so that you can tune them in easily. Up to 56 channels can be preset. Press STATUS Press...
Page 32
ENGLISH Tuning in radio stations n SIRIUS operation Listening to FM/AM broadcasts n Parental Lock Tune to the channel you want to TUNER Operation buttons Function Press to switch the input source to “TUNER”. lock. CH +, – Preset channel selection MENU Amp menu Press...
Page 33
ENGLISH Tuning in radio stations n Presetting radio stations (Manual preset) n Tuner (FM/AM) operation n Listening to preset stations Your favorite broadcast stations can be preset so that you can tune SHIFT Operation buttons Function them in easily. Up to 56 stations can be preset. Press to select the memory CH +, –...
• Your favorite radio stations can be registered by accessing an your PC to create an account and register as a member. For details, Audio Codec) exclusive DENON Internet radio URL from a Web browser on access the following site: JPEG a computer.
ENGLISH Playing a network audio n Searching stations by keyword Listening to internet radio (Alphabetic strings) • There are many Internet radio stations on the Internet, and the Prepare for playback. quality of the programs they broadcast as well as the bit rate of the q Check the network environment, then turn on this unit’s Press to select “Search by Keyword”, then press...
Page 36
ENGLISH Playing a network audio n Clearing internet radio stations from your n Internet radio operation n Listening to preset internet radio stations favorites Operation buttons Function SHIFT After pressing press CH +, – Preset channel selection CH + CH – 1 –...
ENGLISH Playing a network audio Playing files stored on a computer n Media server operation • Connections to the required system and specific settings must be Operation buttons Function Use this procedure to play music files, image files or playlists. made in order to play music files (vpage 22).
ENGLISH Playing a network audio Viewing photographs on the Flickr site Press to select the folder, and then press ENTER Press to select the folder, and then press ENTER You can view photographs shared by particular users, or all of the photographs shared on Flickr.
ENGLISH Playing a network audio n Searching from Napster menu n Registering tracks in my Napster library Listening to Napster to select search item or Press while the track you wish Prepare for playback. folder, then press ENTER to register is playing. q Check the network environment, then turn on this unit’s power (vpage 22 “Connecting to a home network (LAN)”).
(next page). I have a Pandora account SEARCH To cancel, press ui or I am new to Pandora Please got to http://www.pandora.com/denon and follow the instructions there to create a new account. Your aactivation code is 4DA2C67B Continue Cancel...
Page 41
ENGLISH Playing a network audio n Creating an original radio station n Arranging tracks within radio stations n Listening to a created radio station You can create up to 100 original radio stations. You can sort tracks by operating the Pandora menu screen while Listening to a created radio station (e.g.
ENGLISH Playing a network audio n Sign out Listening to Rhapsody NOTE Disassociate this unit from your Pandora account. • The password should be no longer than 99 characters. Prepare for playback. RETURN • Press to cancel the input. When “Cancel input?” is While the Pandora top menu is q Check the network environment, then turn on this unit’s ENTER...
Page 43
ENGLISH Playing a network audio n Track menu w Enter a character search for the track you want to listen to • To play back compressed audio with extended bass or treble Press during playback to display reproduction, we recommend playback in RESTORER mode the track menu.
ENGLISH Playing a network audio Playing a USB memory device n Rhapsody operation Playing back music or still picture (JPEG) files recorded on a USB GCompatible formatsH memory device. Operation buttons Function USB memory devices CH +, – Preset channel selection Important information WMA (Windows Media Audio) MENU...
/ Character search NOTE favorites RETURN Return • Note that DENON will accept no responsibility whatsoever for any Internet Radio Playback / Pause Media Server problems arising with the data on a USB memory device when using Auto search (cue) this unit in conjunction with the USB memory device.
The surround effects suitable for the source type or according to your DOLBY PLgz This mode is for 7.1-channel surround playback Surround surround playback liking can be selected from the DENON original sound mode and is used using the front height speakers. (vpage 45) for playback. Multi channel •...
Page 47
ENGLISH Standard playback Displaying the currently playing surround mode z1 This is displayed when the input signal Select the mode corresponding to the playback is “DTS-ES Matrix 6.1” and this unit’s contents with the menu “Surround Parameter” – Input signal Surround mode Display “AFDM”...
In this case, try other modes to achieve a sound field suited to your tastes. NOTE When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or DTS Express, you cannot select DENON original surround mode.
ENGLISH Advanced version Advanced version Here, we explain functions and operations that let you make better use of this unit. F Speaker installation/connection (Other than 5.1-channel) vpage 47 F Playback (Advanced operation) vpage 52 F Playback in ZONE2 (Separate room) vpage 59 F How to make detailed settings vpage 61 F Operating the connected devices by remote control unit vpage 89...
ENGLISH Speaker installation/connection (Other than 5.1-channel) When 6.1ch (Surround back speaker) installed Here we describe the installation, connection and setup methods for speakers other than 5.1-channel Install the surround back speakers in a position 2 to 3 ft (60 to 90 cm) speakers.
ENGLISH Connect • For the method of connecting 5.1-channel speakers, see page 4. 6.1-channel (Surround back speaker) connection • For the method of connecting the TV, see page 5. If using only one surround back speaker (with a 6.1-channel connection), connect to the “L” side of the 7.1-channel (Surround back / Front height / Front wide speaker) connection SURR.
Page 52
ENGLISH Connect Front A/B connection 2.1-channel connection Bi-Amp connection The second set of front speakers can be connected to the SURR. A bi-amp connection is to connect separate amplifiers to the tweeter BACK/AMP ASSIGN terminals. terminals and woofer terminals of speakers compatible with the In this case, set “Set up “Amp Assign””...
ENGLISH Connect Set up speakers around items indicate the settings. 5.1-channel + 2.1-channel connection Here we describe how to set up speakers other than 5.1-channel speakers. If front speakers for 2-channel playback are connected to the SURR. BACK/AMP ASSIGN terminals, both For the method of setting up 5.1-channel speakers, see “Simple version”, “Set up speakers speakers for multichannel playback and for 2-channel playback can be used, by switching.
Page 54
ENGLISH Set up speakers NOTE GWhen “Front” is selected in step 6H Set up “Amp Assign” Set up “Channel Select” After performing Audyssey ® Auto Setup, do not Press to select a front speaker. change the speaker connections or subwoofer to select “Amp Assign”, to select “Channel Select”, volume.
ENGLISH Playback (Advanced operation) Convenient functions Enable the HDMI control function of this unit. Playback (Basic operation) (vpage 23) Set “HDMI Control” (vpage 80) to “ON“. HDMI control function Turn the power on for all the equipment connected Selecting a listening mode (Surround mode) by HDMI cable.
ENGLISH Convenient functions Sleep timer function Adjusting the volume of the speakers n Adjusting the volume of groups of speakers (Fader function) The power automatically goes into standby once the set time has You can adjust the channel level either according to the playback This function lets you adjust (fade) the sound all at once from the elapsed.
Page 57
ENGLISH Convenient functions Quick select function ZONE2 / REC SELECT SOURCE SELECT • The Quick Select function can be set separately for the different • To cancel, press , then turn All of the settings in step 1 can be memorized together. By memorizing zones (vpage 60 “Quick select function”).
Page 58
While in the party mode, press While in the party mode, press The same network audio (Internet radio, Media server or iPod DIRECT) can be played on multiple DENON products equipped with the Party PARTY PARTY Mode function and connected in a network.
Page 59
ENGLISH Convenient functions Operating a wireless LAN-compatible mobile terminal to play n Playing contents on a mobile terminal device music and still pictures Wireless LAN- Mobile terminal device This unit compatible router • Perform this procedure using a wireless LAN-compatible mobile terminal conforming to the DLNA (Digital Living Network Alliance) standard.
Tools Help We recommend registering the setting screens for the different INDEX zones in the browser’s favorites so as not to accidentally perform DENON Web Controller menu operations for zones you do not intend to operate. AVR-991 MAIN ZONE Status -50.0dB...
ENGLISH Convenient functions GExample 2H Setup menu screen GExample 4H PDA menu screen GExample 6H Dedicated iPod Touch screen SOURCE SELECT ReLoad Zone Power DENON Web Controller AVR-991 SETUP MENU Source SAT/CBL Source Input Assign SOURCE SELECT MAIN ZONE Control...
ENGLISH Playback in ZONE2 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2) Video output w ZONE2 playback by audio output other than the MAIN ZONE (room where the unit is located). •...
ENGLISH Adjusting the volume Playback Quick select function VOL df to adjust the volume. It is also possible to save three settings for ZONE2. Switch ZONE SELECT GAdjustable rangeH – – – –80dB – –40dB – 18dB “ZONE2”. n Saving the settings (When the “Volume Display”...
ENGLISH How to make detailed settings Menu map Setting items Detailed items Description Page 1. Audio/Video Adjust Audio Adjust Adjuts various audio parameters. For menu operation, connect a TV to this unit and Picture Adjust Adjusts the picture quality. display the menu on the TV screen. For menu AUDIO/VIDEO ADJUST operations, see the following page.
ENGLISH Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description Top menu display q The menu items are displayed here. MENU w The selected line is displayed here.
ENTER • Use to input (Normal screen) w Guide for operation buttons Example: For changing the input source from “DVD” to “DENON” characters. q Place the cursor at “V”. • Operating with the remote control unit. Using the number buttons Using the keyboard •...
0123456789 Repeat steps 2 and 3 to change the name then press ! “ # $ % & ’ ( ) z + , ; < = > Edit DENON:[AVR-3311CI] ENTER GLower case characters/Numbers/SymbolsH to register it. abcdefghijklmnopqrstuvwxyz 0123456789 ˜...
ENGLISH Items that can be set with the Input Setup procedure Input Setup Auto Preset (vpage 66) Preset Skip (vpage 66) Parental Lock (vpage 66) Perform settings related to input source playback. INPUT SETUP INPUT SETUP INPUT SETUP • You do not have to change the settings to use the unit. Make settings when needed. AUTO PRESET PRESET SKIP [1/7]...
ENGLISH Input Setup Auto Preset Setting items Setting details Edit Lock Code ENTER 1. Press to select “Edit Lock Code”, and then press Use the auto preset function to program radio stations. Change the password. ENTER 2. Input current lock code (4 digits) using uio p , and press Setting items...
ENGLISH Input Setup Input Assign Setting items Setting details HDMI HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 Set this to change the HDMI None : Do not assign an HDMI input connector to the selected input Examples of input assign menu screen displays input connectors assigned source.
Page 71
ENGLISH Input Setup Setting items Setting details Setting items Setting details Component 1-RCA / 2-RCA (Component video) Video Mode Auto : Process video automatically based on the HDMI content Set this to change the None : Do not assign a component video input connector to the selected Make settings for video information.
ENGLISH Input Setup Input Mode Setting items Setting details Default settings are underlined. Resolution Auto : The number of pixels the TV connected to the HDMI output Set the output resolution. connector supports is detected automatically and the appropriate output The input modes available for selection may vary depending on the input source.
ENGLISH Input Setup n Input source : “NET/USB” Source Level Default settings are underlined. Setting items Setting details • This function corrects the playback level of the selected input source’s audio input. Repeat All : All files are played repeatedly. •...
ENGLISH Audio Adjust Audio/Video Adjust The sound being played in the surround mode can be adjusted to your liking. n Surround Parameter Default settings are underlined. The items (parameters) that can be adjusted depend on the signal being input and the currently set surround mode.
Page 75
ENGLISH Audio/Video Adjust Setting items Setting details Setting items Setting details Panorama ON : Set. Height Gain Low : Reduce the front height channel volume. Assign front L/R signal also OFF : Do not set. Control front height Mid : Front height channel sound is output with standard sound volume. to surround channels for channel volume.
Page 76
OFF : Sound is not output from the surround back speakers, front wide you may not be able to select Dynamic EQ/Dynamic Volume, and “Run Audyssey” may be displayed. DENON original surround speakers, and front height speakers. In this case, either perform Audyssey Auto Setup over again or perform “Restore” (vpage 10) to return to mode.
Page 77
ENGLISH Audio/Video Adjust Setting items Setting details Setting items Setting details Dynamic EQ ® Dynamic Volume ® ON : Use Dynamic EQ. Midnight : Most adjustment to softest and loudest sounds. Solve the problem of OFF : Do not use Dynamic EQ. Solve the problem of large Evening : Medium adjustment to loudest and softest sound.
Page 78
ENGLISH Audio/Video Adjust n A-DSX Soundstage n Manual EQ Default settings are underlined. Default settings are underlined. Adjust Audyssey DSX™ setting and sound stage parameters. Use the graphic equalizer to adjust the tone of each speaker. “Manual EQ” can be set when “MultEQ XT” setting (vpage 73) is “Manual” Setting items Setting details Setting items...
Page 79
ENGLISH Audio/Video Adjust n RESTORER Picture Adjust Default settings are underlined. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce • This item can be set when the input source is SAT/CBL GAME V.AUX the amount of data by eliminating signal components that are hard for the human ear to hear. The DOCK NET/USB .
ENGLISH Speaker Setup Manual Setup Default settings are underlined. Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup. or other settings. •...
Page 81
ENGLISH Manual Setup Setting items Setting details Setting items Setting details Speaker Config. Subwoofer : Set the presence of a subwoofer. Speaker Config. F.Wide : Set the presence and size of the front wide speakers. (Continued) • Yes : Use a subwoofer. (Continued) •...
Page 82
ENGLISH Manual Setup Setting items Setting details Setting items Setting details Distance Crossover Frequency Crossover : Set the crossover frequency. (Continued) Set the maximum frequency • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / •...
ENGLISH Manual Setup HDMI Setup Setting items Setting details Default settings are underlined. Standby Source Last : This item is set at the last-used input source. Make settings for HDMI video/audio output. Sets the HDMI input source HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 / HDMI6 : Put the respective to put into standby when input source into standby.
ENGLISH Manual Setup Audio Setup Setting items Setting details Default settings are underlined. 2ch Direct/Stereo Dist.FL / Dist.FR : Select the speaker. Make settings for audio playback. (Continued) • 0.0ft – 60.0ft (12.0ft) / 0.00m – 18.00m (3.60m) : Set the distance to the speaker.
ENGLISH Manual Setup Network Setup Setting items Setting details Default settings are underlined. Network Connecting ENTER r Use to select “Exit” and press Make network settings. (Continued) Setup is complete. • When connecting to the network via a Proxy server, select “Proxy” and Setting items Setting details ENTER...
Page 86
• You can set to the upper limit set with “Volume Limit” (vpage 84) . ENTER Network Status : Displays up to a maximum of 10 DENON products ENTER u Use to select “Exit” and press connected on the same network.
ENGLISH Manual Setup Option Setup Setting items Setting details Default settings are underlined. Rhapsody Account Username / Password Set or change Username • For character input, see page 63. Make various other settings. and Password (vpage 39 Setting items Setting details “Listening to Rhapsody”).
Page 88
Used when receiving NOTE maintenance from a DENON Master Volume : Display the master volume during adjustment. Only use this function if so instructed by a DENON serviceperson or service engineer or custom • Bottom : Display at the bottom. installer.
Page 89
When the procedure is complete, “Registered” is displayed in this Use when receiving Only use this function if so instructed by a DENON serviceperson or menu and updates can be carried out. If the procedure has not been maintenance from a DENON installer.
Page 90
• Information regarding the “Firmware Update” function and “Add New Feature” will be announced on the DENON web site each time related plans are defined. • When usable new firmware is released with “Firmware Update” or “Add New Feature”, a notification message is displayed on the menu screen.
ENGLISH Information Items Setting details Quick Select Quick Select 1 / Quick Select 2 / Quick Select 3 / ZONE2 Quick Select 1 / Show information about receiver settings, input signals, etc. Show information about ZONE2 Quick Select 2 / ZONE2 Quick Select 3 •...
ENGLISH Operating the connected devices by remote control unit Registering the supplied preset codes in the remote control unit Operate this unit or the device whose input source is Press the input source select button (vpage 23). enables you to operate devices made by other manufacturers. switched.
Page 93
REMOTE PRESET CODES Input source Category Brand Preset code Blu-ray select button MANUAL SETUP CD Recorder OPTION SETUP Blu-ray Disc player DENON 32258 CABLE CABLE/PVR DVD player DENON 32134 Volume Control DVD Recorder Source Delete HD-DVD Television SONY...
ENGLISH n CD player / CD recorder operation n TV operation Operating components Operation buttons Function Operation buttons Function The supplied remote control unit can control a component other than ZONE/DEVICE ON Power onz ZONE/DEVICE ON Power onz this unit. ZONE/DEVICE OFF Power standbyz ZONE/DEVICE OFF...
ENGLISH ENGLISH Specifying the zone used with the Information remote control unit Information ZONE SELECT When the button is pressed, only the set zone can be operated with the remote control unit. Press and hold POWER ON Here, we list various information related to this unit. ZONE/DEVICE ON for at least 3 Please refer to this information as needed.
ENGLISH Part names and functions DYNAMIC VOLUME ® button ···················· (74) DIMMER button ·········································· (85) Front panel MULTEQ ® XT button ··························· (73, 81) STATUS button ·········································· (88) For buttons not explained here, see the page indicated in parentheses ( ). Display W1 W2 W3 W5 W6...
ENGLISH Display Rear panel Sleep timer indicator See the page indicated in parentheses ( ). This lights when the sleep mode is selected (vpage 53). Q2 Q1 RESTORER indicator This lights when the RESTORER mode is selected (vpage 76). ZONE2 indicators This lights up when ZONE2 (separate room) power is turned on (vpage 60).
ENGLISH Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). ZONE/DEVICE power buttons ············ (60, 92) Remote control signal transmitter ··········· (97) Zone mode indicators ·························· (60, 92) Power buttons (POWER ON / OFF) ······ (6, 11) Input source select buttons ·················...
Page 100
ENGLISH Remote control unit Inserting the batteries Operating range of the remote control unit Point the remote control unit at the remote sensor when operating it. q Slide the rear lid in the w Load the two batteries direction of the arrow and properly as indicated by remove it.
ENGLISH Other information Trademark information “Made for iPod” and “Made for n Trademark information (vpage 98) iPhone” mean that an electronic This product uses the following technologies: n Surround (vpage 99) accessory has been designed to connect specifically iPod, n Relationship between video signals and monitor Manufactured under license from iPhone, respectively, and has been output (vpage 103)
ENGLISH Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and parameters This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each surround mode. Symbols in the table S This indicates the audio output channels or surround parameters that can be set.
Page 103
ENGLISH Surround Surround Parameter (vpage 71) Audyssey Settings z24 (vpage 73) NEO:6 Music PRO LOGIC g/gx Music mode only Audyssey mode only Tone RESTORER DSX™ AFDM F.Height Height Gain Surround mode (vpage 43) S.Back Speaker Subwoofer Dynamic Dynamic EQ ® z24 z25 (vpage 73) MultEQ ®...
Page 104
ENGLISH Surround n Types of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Symbols in the table F This indicates the default surround mode.
Page 105
ENGLISH Surround Input signal types and formats DTS-HD DOLBY DOLBY DIGITAL DTS-HD DOLBY Surround mode (vpage 43) NOTE DTS-HD DTS ES DTS ES DOLBY DOLBY DOLBY DOLBY ANALOG LINEAR PCM LINEAR PCM High DOLBY DOLBY DIGITAL EX Master DSCRT MTRX DTS 96/24 DIGITAL EX DIGITAL DIGITAL...
ENGLISH Relationship between video signals and monitor output MAIN ZONE MONITOR OUT Input Signals Output Signals Menu displayed Video Convert HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO A z2 Wall paper Only the menu is A z2 displayed A (VIDEO) z3 VIDEO...
DLNA and DLNA CERTIFIED are trademarks and/ DENON has further developed its proprietary AL24 sound components for a seamless and enveloping envelopment and blending with the other speakers or service marks of Digital Living Network Alliance.
Page 108
ENGLISH Explanation of terms Dolby TrueHD bookshelf space available to support the addition of sampling frequencies of 96 or 48 kHz and up to This is an internationally standardized audio data Dolby TrueHD is a high definition audio technology height speakers. 7.1 channels of discrete digital sound.
• This unit amplifier circuit has failed. Turn off the power and please – new licenses to copy, display and/or play Secure power, the power contact the DENON service adviser. Content. Revocation does not alter the WM-DRM indicator is blinking Software’s ability to play unprotected content.
Page 110
ENGLISH GAudioH GHDMIH Symptom Cause/Solution Page Symptom Cause/Solution Page Audio is not output. • Check the connections for all devices. 5, 15 – 22 No audio is • Check the connection of the HDMI connectors. • Check the speaker connections. 5, 48 –...
Page 111
• Server is not running. Launch the server. – This is not a malfunction. DENON does not guarantee that all USB • Set’s IP address is wrong. Check the set’s IP address. memory devices will operate or receive power.
ON/STANDBY Turn off the power using Pandora. (“Email Pandora has been properly entered. Re-enter the “Password”. address” or (Password is not displayed.) “Password” is http://www.pandora.com/denon Press ON/STANDBY while simultaneously pressing SURROUND MODE 0 displayed.) SURROUND MODE 1 GRemote Control UnitH...