Epson Equity Ie Product Support Bulletin page 26

PSB NO.: S-0071
SUBJECT: EQUITY
This bulletin
factor for
Epson configuration
8425F 20MB hard disk drive.
The Equity Ie's
initialized
the optimum hard disk performance.
When changing the
option in
interleave
If your unable
format or
program,
to perform
When using
interleave.
with the low level format. The DEBUG procedure is as follows:
1. Insert
Drive A:.
2. Type the following: (shown in
A>DEBUG
-RAX
AX 0000
:0005
-G=C800:5
The CPU will
interleave 05!
with
After "Y" is pressed,
to perform
continue the
to partition the
program to format the MS-DOS partition and to copy the MS-DOS
Startup/Operating 1 files to the hard disk.
If your installing
determine the
as SpinRite or equivalent.
EPSON AMERICA
P S
RODUCT
DATE: 3/10/89
Ie / MINISCRIBE
provides information
the Equity Ie
- WX1 hard disk controller and Miniscribe
Miniscribe
with an interleave
interleave,
the "DIAG"
of 5:1.
to use the
this format
a low
DEBUG, an
This should
the Startup /
n
(Enter)
(Enter)
then display:
the format will take about ten minutes
the low
level
hard disk
hard disk
a 3rd
best interleave
SERVICE, 23610
B
UPPORT ULLETIN
ORIGINATOR: RE
8425F HARD
on the
computer when
8425F hard
of 5:1.
use the
program which
Unconditional
operates very
level format,
of
interleave
be changed to
Operating 1 floppy
bold)
"Y" to begin
Press
Once
format.
preparation using
for MS-DOS,
party hard
factor by using a program such
TEL0 AVENUE,
PAGE:
DISK DRIVE INTERLEAVE
correct interleave
the standard
using
should be
disk drive
This will
Unconditional
sets the
Format option to
slowly, the
will be required.
3:1 is the
5:1 before proceeding
diskette
formatting
this has completed,
the FDISK
then use the SELECT
disk and controller,
TORRANCE, CALIF.
1 of 1
provide
Format
default
DEBUG
default
into
program
90505