Download Print this page

Epson Equity Ie Product Support Bulletin page 22

Product support bulletin(s)
Hide thumbs Also See for Equity Ie:

Advertisement

EPSON
EPSON AMERICA, INC.
SERVICE
PSB MO.: S-0075
SUBJECT:
Equity Ie Common Questions and Answers
General
Can the CPU speed be changed during operation?
Yes, it can.
How do I set the date and time of the real time clock?
Set the date and time with the MS-DOS 3.30 DATE and
TIME
DATE and TIME commands do not affect the RTC data in
CMOS RAM.
do change CMOS RAM values.
Can the Equity Ie be operated at 220 VAC?
Q3.
A.
Yes,
it automatically senses the input power. the input
power should be between 90 and 265 VAC.
Does the Equity
No, it uses the same 8 bit PC/XT bus as the PS/2 Model
30.
Can OS/2 be used with the Equity Ie?
No, OS/2 will not run with the Equity Ie's 8086 CPU.
OS/2 will only run on machines that use an 80286 or
80386
Is
the
No, it has only programmable pitch and duration.
I cannot program the new MCGA modes in GWBasic. Why?
GWBasic 3.2 does not support the new video modes. Consult
the GWBasic manual for all video modes supported.
Hard Drives
What hard drive and controllers can
IBM PC/XT compatible hard drive controllers and 3.5"
half height hard disk drives.
has been tested and found compatible.
8425F is the hard drive supplied by Epson for the
Equity
access time.
Can I install a hard card?
.
Yes, the hard card should be full length because the
expansion
EPSON
AMERICA
P
RODUCT
DATE: 03/21/89
commands.
With MS-DOS versions up to 3.20, the
Starting
Ie
have a Microchannel bus?
CPU.
speaker
volume
Ie.
It is a 20Mb hard disk drive with a 40ms
slots
are
SERVICE,
23610
S
B
UPPORT
ULLETIN
ORIGINATOR:
with
version
3.30
adjustable?
The
mounted
horizontally.
TEL0
AVENUE,
PAGE: 1
KAS
these
commands
I use?
WD1002-WX1
controller
The
Miniscribe
TORRANCE,
CALIF.
of 4
90505

Advertisement

loading