The Movie Controller - Autodesk 64006-051108-9001 - Discreet Cleaner - Mac User Manual

To manually change the size of the video image, do one of the following:
• Drag the lower right corner of the Project window.
• In the Windows menu, choose Half Size or press
half their normal size.
This option is useful if you have a large movie or image and a small monitor.
• Choose Full Size or press
• Choose Double Size or press
This option is helpful for accurate cropping or to see what a movie looks like when played
at double size.
• Choose Fit to Window or press
by your monitor.
The display size of the image in the Project window does not affect the final size of the image
or movie. To control the size of the final image or video, use the parameters in the Image tab in
the Settings window.

The Movie Controller

The Movie Controller shows the duration and current time of the source. It also has standard
controls for movie playback.
Depending on the speed of your computer and the format of the source file, the file may not
play smoothly. Even if playback is not smooth within the Project window, the final encoded file
will still play properly. If a source file does not play smoothly, use the movie controller to move
to any spot in the movie or step through it frame by frame.
In Point
Immediately underneath the movie controller is a yellow line with a green point on the left side
and a red point on the right side. The green and red points are the In and Out indicators that
show the portion of the source file to be processed.
To set the In and Out Points:
To set the In Point at the current time, press
1.
To set the Out Point at the current time, press
2.
Move the time controller to the in point by pressing T and move the time controller to the
Note:
out point by pressing Y.
1 to display movies or images at their normal size.
2 to display movies or images at double their normal size.
3 to display movies or images at the maximum size allowed
[.
].
The Project Window
0 (zero) to display movies and images at
33
Out Point