ViewSonic Pro9000 User Manual page 33

Sleep Timer
Sets the countdown timer interval. The countdown timer will start, with or without a
signal being sent to the projector. The projector will automatically power off when
the countdown has finished (in minutes).
Power Saving
Sets the countdown timer interval. The countdown timer will start, when there is no
signal being sent to the projector. The projector will automatically power off when
the countdown has finished (in minutes).
Auto Source
On: The projector will search for other signals if the current input signal is lost.
`
Off: The projector will only search current input connection.
`
Signal Type
Specify the input source that you wish to project.
Auto : Automatically detect the input signal type.
`
RGB : For VGA signal.
`
YPbPr: For component signal.
`
ECO Mode
Choose "On" to dim the projector lamp which will lower power consumption and
extend the lamp life. Choose "Off" to return to normal mode.
High Altitude
Use this function to allow the fans to operate at full speed continuously to achieve
proper high altitude cooling off the projector. Choose "On" to activate this function.
Direct Power On
Choose "On" to activate Direct Power mode. The projector will automatically power
on when AC power is supplied, without pressing the "
control panel.
" button on the projector
32