Sony XBA-BT75 Operating Instructions Manual page 16

Wireless stereo headset
Hide thumbs Also See for XBA-BT75:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
To stop use
1
Terminate the Bluetooth
connection by operating the
Bluetooth device.

Press and hold the
about two seconds, until the
indicator (blue) lights up.
The unit is turned off and then the
indicator goes off.
Tip
When you finish playing music, the
Bluetooth connection may terminate
automatically, depending on the Bluetooth
device.
1
GB
If the Bluetooth audio device connected
button for
with this unit supports AVRCP, you can
control it by the unit buttons.
Note
Operation of a Bluetooth connected device
by this unit will vary depending on its
specification. Refer to the operating
instructions supplied with the Bluetooth
device.
Music playback -
To play back, press during pause; to pause, press
during playback.
Skip to the next/previous song
- +/– button
Press and hold during playback or pause until
you hear a chime from the unit. The + button
skips to the next song; the – button skips to the
previous song.
Fast-forward/fast-rewind a song*
- +/– button
Press and hold during playback or pause until
you hear fast-forward/rewind sound from the
unit. Press the + button to fast-forward a song;
press the – button to fast-rewind.
* This operation may skip to the next/
Tip
Depending on the Bluetooth device, it may
not be possible to skip to a previous song. In
this case, press and hold the - button, and
release when a chime is heard, then press
again. It may be possible to skip.
Controlling a Bluetooth
connected audio device
– AVRCP
previous song continuously depending on
the Bluetooth device. Some Bluetooth
devices may not work.
button

Advertisement

Table of Contents
loading

Table of Contents