Listening To Music - Sony XBA-BT75 Operating Instructions Manual

OPERATING THE UNIT

Listening to music

(Multi function) button
+/– button
This unit supports SCMS-T content
protection. You can enjoy music, etc.,
from a device such as a mobile phone or
portable TV that supports SCMS-T
content protection.
Check the following before operating the
unit.
– The Bluetooth device is turned on.
– Pairing of this unit and the Bluetooth
device is complete.
– The Bluetooth device supports the
transmitting music function (profile:
A2DP*).
* For details on profiles, see page 4.
1
While this unit is turned off, press
and hold the
two seconds, until the indicator
(blue) flashes twice.
The unit is turned on and the
indicator (blue) flashes slowly (or
flashes twice).
button for about
Note
After the unit is turned on, it attempts to
connect to the last connected Bluetooth
device automatically with HFP or HSP.
When not calling with this unit, do not
make the last connected Bluetooth
device ready for HFP or HSP
connection. To make or receive a call
while playing back music, see page 19.

Make the Bluetooth connection
(ADP) from a Bluetooth device to
this unit.
Refer to the operating instructions
supplied with the Bluetooth device on
how to operate it.

Start playback on the Bluetooth
device.
Tip
A2DP Bluetooth connection can also be
performed with the
making a call on this unit.
Note
If this unit is turned off while an A2DP
Bluetooth connection is established, operate
the unit again from step 1 to make the A2DP
Bluetooth connection again.
Tips on adjusting the volume
 Depending on the connected device, it
may also be necessary to adjust the volume
on the connected device.
 Volume for calling and listening to music
can be adjusted independently. Even if you
change the volume while calling, music
volume will not change.
button, except when
Continued
1
GB