Picture Menu - Sharp Aquos LC-40LE700UN Operation Manual

On-Screen Display Menu

Picture Menu

Adjusts the picture to your preference with the
following picture settings.
Example
Picture
OPC Off
[b12] a16
Backlight
Contrast [b30]
a30
Brightness [ 0]
a30
Color [ 0]
a30
Tint [ 0]
[ b2] a10
Sharpness
Advanced
Reset
1
Press MENU to display the MENU screen, and then
press c / d to select "Picture".
Press a / b to select a specifi c adjustment item.
2
Select "Advanced" and then press ENTER to set
"C.M.S.-Hue", "C.M.S.-Saturation", "C.M.S.-Value",
"Color Temp.", "Fine Motion Enhanced", "Active
Contrast", "Gamma Adjustment", "Black Level",
"Film Mode", "Digital Noise Reduction", "3D-Y/C",
"Monochrome" or "Range of OPC".
Press a / b (or c / d ) to select the desired setting,
3
and then press ENTER.
4
Press MENU to exit.
c button
Selected item
Backlight The screen dims
Contrast For less contrast
Brightness For less
brightness
For less color
Color
intensity
Tint Skin tones
become reddish
Sharpness For less
sharpness
• For resetting all Picture adjustment items to the factory
preset values, press a / b to select "Reset", press ENTER,
press c / d to select "Yes", and then press ENTER.
On
On : Display
b16
b40
0
b30
b30
b30
b10
d button
The screen
brightens
For more contrast
For more
brightness
For more color
intensity
Skin tones
become greenish
For more
sharpness
OPC Setting
Automatically adjusts the brightness of the screen.
Off: The brightness is fi xed at the value set in "Backlight".
On: Automatically adjusts.
On: Display: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
• When set to "On", the Optical Picture Control (OPC)
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure nothing obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
• When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
• When set to "On" or "On: Display", the OPC indicator on
the TV lights green.
Advanced Picture Setting
This TV provides various advanced functions for
optimizing the picture quality.
C.M.S.
(Color Management System)
Color tone is managed using the six-color adjustment
setting.
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S.-Saturation: Increases or decreases the
saturation of a selected color.
C.M.S.-Value: A higher value makes the image brighter.
A lower value makes the image darker.
• For resetting all adjustment items to the factory preset
values, press a / b to select "Reset", and then press
ENTER.
Color Temp.
(Color Temperature)
For a better white balance, use color temperature
correction.
High: White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low: White with reddish tone
White balance can be adjusted between a maximum of
+30 and a minimum of –30 for each color temperature.
R Gain (LO/HI): –30 through +30
G Gain (LO/HI): –30 through +30
B Gain (LO/HI): –30 through +30
• For resetting all adjustment items to the factory preset
values, press a / b to select "Reset", and then press
ENTER.
21