On-Screen Display Menu; On-Screen Display Menu Operation; Menu Operation Buttons - Sharp Aquos LC-40LE700UN Operation Manual

On-Screen Display Menu

On-Screen Display Menu Operation

Example
Picture
OPC
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Reset
: Select : Enter
ENTER
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
1 Press c / d to select the desired item.
2 Press a / b to select the desired item.
3 Press c / d to adjust the item.
• Menu options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly
from the actual screens.
LCFONT:
• This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-
to-read characters on LCD screens.

Menu Operation Buttons

Using the remote control
Use the following buttons on the remote control to
operate the menu.
MENU: Press to open or close the menu screen.
a / b / c / d :
Press to select a desired item on the screen or
adjust a selected item.
ENTER: Press to go to the next step or complete the
setting.
RETURN: Press to return to the previous step.
LCFONT embedded
Off On
On : Display
[b12] a16
[b30] 0
a30
[ 0]
a30
[ 0]
a30
[ 0]
[ b2] a10
: Back : Exit
RETURN MENU
b16
b40
b30
b30
b30
b10
1 Item displayed in yellow
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for this
item.
2 Item in brackets
• This indicates the current setting for the item.
3 Item displayed in white
• This indicates that the item can be selected.
4 Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
—Nothing is connected to the selected input terminal.
—The function is not compatible with the current input
signal.
Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
Example
Option
AQUOS LINK Setup
Audio Only
PC Audio Select [Input 4 (PC)]
Auto Volume [On]
Clear Voice [On]
Output Select [Fixed]
Caption Setup
Digital Caption Info.
Program Title Display [No]
Favorite CH
Operation Lock Out [Off]
Channel selecting effect [No]
Demo Mode
MENU: MENU on the remote
control.
INPUT: ENTER on the remote
control.
: Cursor a / b on the
CH /
remote control.
VOL k / l : Cursor c / d on the
remote control.
19